Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2015 Johnson Controls, Inc. www.johnsoncontrols.com
R-113
Selection Chart
Accessories
Product Code Number Description
CST29A-600C Adaptor Block for Carlyle Compressor Series O6CC, O6D, and O6E;
Includes Allen-head bolts.
Product Code Number Description
P545NCB-82C Electronic Lube Oil Pressure Control, 120 second delay before lockout, with P400AD-1 switch and WHA-P400-100 switch cable
P400AD-1C Replacement Differential Pressure Switch with WHA-P400-100 Wire Harness
Open at 7 ±1.0 psi, Close Less than or Equal to 2.0 psig above Open Point
KITP545-82C Single Pack P545 with Adaptor Block and Allen-head Bolts
WHA-P400-100C 3-1/3 ft (1 m) Length Wiring Harness
WHA-P400-125C 4 ft (1-1/4 m) Length Wiring Harness
WHA-P400-250C 8 ft (2-1/2 m) Length Wiring Harness
WHA-P400-400C 14 ft (4-1/3 m) Length Wiring Harness
Carlyle Supplied Parts
06DA680063
1
1. Order this part from a Carlyle distributor. For information on the nearest Carlyle distributor, contact Carlyle at 1-800-462-2759.
Adaptor Block Gasket for Carlyle Compressor Series O6CC, O6D, and O6E
CST29A Adaptor Block for Carlyle® Compressors
Description
The Johnson Controls/PENN® CST29A
Adaptor Block is designed for use on Carlyle®
compressors (models O6CC, O6D, and O6E)
equipped with an oil pump. The adaptor block
allows for the installation of the P400 single
point differential pressure switch for use with
the P545NCB-82 electronic lube oil control.
Refer to the CST29A Adapter Block for Carlyle
Compressors Product Bulletin (LIT-125730)
for important product application information.
Features
simple installation— provides easy
conversion of electromechanical lube oil
control system to electronic equivalent
designed specifically for Carlyle
applications— applies to Carlyle
compressor models O6CC, O6D, and O6E
Repair Information
If the CST29A Adaptor Block for Carlyle
®
Compressors fails to operate within its
specifications, replace the unit. For a
replacement adaptor, contact the nearest
Johnson
Controls®
representative.
CST29A Adaptor Block
Electronic Lube Oil and Differential Pressure Controls
Code No. LIT-1900111