User's Manual

Dialing a Number with Voicetags

To dial a stored name and location using voicetags:

1. Say "Call {name} at {location}" in a clear voice. For example, "Call John at home."

2. The system will respond with "Calling {name} at {location}," playing back the name and

location that it recognized. It will then ask "Is this correct?"

3. If the name and location are correct, say "Yes." The system with then say "Dialing" and dial

the appropriate number and allow you to carry on your conversation (the other party will be

heard over the radio speakers).

4. If the name and/or location are incorrect, say "No." Say the name and location again (for

example, say "John at home") – see step 2 for the next step.

5. Press the Phone button when finished with your call or while dialing if you change your mind

and do not want to continue the dialing process.

Using Call Waiting

Note: Only available if service is available with cellular service provider.

To use call waiting when a call is active over the HFM:

1. The phone call indicator tone is heard once over the radio speakers to indicate an incoming

call.

2. To answer the second call, press and release the Phone button. If you do not press the Phone

button, the second call will not be answered.

3. To transfer between two active calls, press and release the Phone button.

4. To terminate the call, press and hold the Phone button for one second. The second call will

then become the active call.

Using Barge In

HFM's Barge-In mode allows the user to use voice recognition in telephone menu systems. If

they call a phone number that gives them a choice from a menu and they have to choose a

number, they simply push the VR button and say the number.

1. To activate VR mode, press the VR button. The user will hear a tone indicating that the HFM

is listening.

2. Say "{number}" (one or more digits) based upon function desired.

3. System sends out DTMF (Dual-Tone Multi-Frequency) tones over the Bluetooth phone

connection.

4. Barge In ends.