User Manual

Published in U.S.A. www.johnsoncontrols.com
Converter with Bluetooth® Wireless Technology (BTCVT) Installation Instructions8
Metasys® is a registered trademark of Johnson Controls, Inc.
All other marks herein are the marks of their respective owners.
© 2004 Johnson Controls, Inc.
Controls Group
507 E. Michigan Street
Milwaukee, WI 53202
this information may change
FCC PART 15 NOTICE (APPLICABLE TO USE WITHIN THE USA)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undersired operation.
WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device as applicable, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The user may find the following booklet prepared by the Federal Communications Commission helpful:The Interference Handbook This
booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402. Stock No. 004-000-00345-4.
WARNING: Changes or modifications not expressly approved by the party responsible for the compliance could void the user’s authority to
operate the equipment.
MANUFACTURER’S DECLARATION OF CONFORMITY
Johnson Controls, Inc.
Controls Group
507 E. Michigan St.
Milwaukee, WI 53202
Declares that the Product:
Date: 1 February, 2004
Brand Name: Johnson Controls, Inc.
Model Number: MS-BTCVT-0
Equipment Type: Converter with Bluetooth Wireless Technology
Complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
INDUSTRY CANADA NOTICE (APPLICABLE FOR USE WITHIN CANADA)
IC: xxxxx-yyyyyyyyy
The term “IC” before the certification/registration number only signifies that the Industry Canada specifications were met.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide
maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. The installer of this radio equipment
must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general
population; consult Safety Code 6, obtainable from Health Canada’s website
www.hc-sc.gc.ca/rpb.
EUROPEAN COMMUNITY CE NOTICE
Marking by the symbol indicates compliance of this equipment to the R&TTE Directive 1999/5/EC. Such marking is indicative that this
equipment meets or exceeds the following technical standards:
–
ETS 300 328 — Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; data transmission equipment
operating in the 2,4GHz ISM band and using spread spectrum modulation techniques
–
ETS 301 489-17— Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic Compatibility (EMC) standard for radio equipment
and services; specific coniditions for Wideband data and High PErformance Radio Local Area Network (HIPERLAN) equipment
–
EN 60950 — Safety of information technology equipment, including electrical business equipment
This device may be used throughout the European Community.