User Manual

Converter with Bluetooth® Wireless Technology (BTCVT) Installation Instructions2
this information may change
Dimensions
Accessories
Mounting
Mounting Location Considerations
Observe the following guidelines when mounting an
BTCVT:
• Always hang the BTCVT using the strap provided.
Note: Use the strap loop to hang the BTCVT or
attach the strap magnet to a metal object (such as
a metal pipe).
• Mount the Converter in areas free of corrosive
vapors and observe the environmental limitations
listed in the Technical Specifications
section of this
document.
• Objects (including ductwork, cabinets, doors, and
glass) can impede the wireless signal. Minimize
the amount of objects between the laptop computer
and the BTCVT. Use line-of-sight, if possible.
Wiring
Wiring Consideration and Guidelines
Observe the following guidelines when wiring the
BTCVT:
• Do not allow the BTCVT to hang from the cable
connection. Always use the strap provided to hang
the BTCVT.
• Provide some slack in the cable between the
BTCVT and the controller.
Figure 1: Front of the BTCVT, Dimensions (mm/in.) and Other Physical Features
Status LEDs
Protective PVC Boot
SA/FC Bus
(6-Pin RS-485 Port)
Upgrade Firmware Button
(Not Currently Employed)
Do Not Push
35
1.4
75
2.9
116
4.6
btcvt-iso
On Back:
Fold-out Kickstand
Hanging Strap Attachment Point
Not Shown:
Hanging Strap
MAC Address
On Labelt
Table 1: Products and Accessories (Order Separately)
Code Number Description
MS-BTCVT-0 Converter with Bluetooth Wireless Technology
<??> Cable replacement set; includes one 5-ft retractable cable