User Manual

15
Draft Copy
STEP PAIRING A PHONE TO THE HFTM SYSTEM (Continued)
7
Press the phone's down button once until you see "Search for audio
accessories". Press the Select button.
The phone tells you it is searching.
8
The "Devices Found" screen appears (a small car with the words
"BLUConnect" next to it). Press the Select button. The words "Connecting
to…" are displayed.
9
When the phone's screen displays "Enter passcode: ", enter the same
passcode you used for the HFTM on the phone's keyboard. When finished
entering the passcode, press the phone's OK button.
10
The HFTM says “A new phone has been found. State the name for this phone”.
Press the HFTM pickup button and say the name for your phone (such as
"Nokia 6310i").
11
You will hear “Nokia 6310i has been successfully paired. Returning to main menu”.
Press the phone's Back button two times to return to the "T-Mobile screen".
Unpairing a Phone from the HFTM System
To remove the registration between the HFTM module and your cellular phone(s), you must delete the
paired phone(s).
CAUTION
After deleting a paired phone, if you attempt to use the HFTM to make a call with that
phone, the HFTM tells you the phone cannot be found and returns to the main menu. If
no phones are paired to the HFTM, the HFTM tells you no phones can be found and
returns to the main menu.
NOTE
If you make a mistake during the deleting process or decide not to clear a phone, press
and hold the hangup button until it beeps two times to exit the unpairing procedure.
Unpairing a Phone Using "List"
STEP UNPAIRING A PHONE USING "LIST"
1
Press the pickup button and say "Phone Options".
The system prompts you with available options.
2
Say "List".
The system lists the phones paired to your HFTM.
Continued…
Pairing a Phone
Unpairing a Phone