User's Manual

CB2-BLUE15M-TCU Owner’s Manual Draft
Page 6 of 10
Connect to another device
Connection Lost (e.g. out of range, device stops responding, etc…)
3.2.6 TCU Bluetooth Name
The TCU Bluetooth Name is the name that is provided by the TCU to the other Bluetooth devices (i.e.
phones, music players, etc…). This name provides a user friendly way (instead of the Bluetooth
address) to identify the TCU during pairing, connecting, etc. This name is set during the
manufacturing process and the name used depends on the targeted vehicle and destination for the
TCU. Typically the Bluetooth Name will display as “Honda HFT”.
3.2.7 Bluetooth On/Off Setting
The user may disable Bluetooth (BT) connectivity to prevent the TCU from performing BT
connections with other devices, or to stop BT wireless Radio Frequency (RF) emissions. When BT
operation is disabled, all BT functions will be invalid. Also, when BT operation is disabled neither
pairing nor connection with other BT devices can be accomplished.
3.2.8 AVP Battery Strength Indication
When the TCU makes a Bluetooth (BT) wireless connection to any device, the battery status of the
device is determined (if possible) and sent to the in-vehicle display to the user of the vehicle. This
Battery Status is displayed in case the user is not aware of a problem with the device battery.
3.3 Phonebook Management
The TCU provides users with the ability to list a phonebook and call the contacts present in the
telephony device phonebook. The users can access their phonebook using the in-vehicle controls
while a Mobile Device is connected to the TCU and the phonebook has been successfully downloaded
from the Mobile Device. The TCU will only import the main phonebook.
3.4 Call History
Call history includes Dialed, Missed, Received, and All Call History categories as received from the
Mobile Device and can be listed to make an outgoing call when the MD is connected. The Call
History list is, however not available while a Mobile Device is disconnected. If a Call History request
is made while no Mobile Device is connected, the TCU will not fulfill the request.
3.5 Call Management
3.5.1 Dial from Phonebook Contact
The user can initiate an outgoing call by selecting any contact from the on-screen phonebook.
3.5.2 Dial from Call History
The user can initiate an outgoing call by selecting any entry from the on-screen call history list.