CB2-BLUE15M-TCU Owner’s Manual Draft Johnson Controls, Inc.
CB2-BLUE15M-TCU Owner’s Manual Draft 1 System Diagram The following diagram shows a high-level overview of how the user will be able to connect through the TCU to receive TCU services from the telematics service provider as well as the OEM servers.
CB2-BLUE15M-TCU Owner’s Manual Draft 2 Embedded Phone (CDMA) Features 2.1 Automatic Crash Notification (ACN) The ACN feature is used to establish a voice call with the Telematics Service Provider (TSP) call center in the event of a collision. A message is sent to the TSP with the location and vehicle status while an LED is blinked, textual indicators are displayed, and a prompt is played to the passengers notifying them of a pending voice call with the TSP.
CB2-BLUE15M-TCU Owner’s Manual Draft 2.8 Point of Interest (POI) Download The POI Download feature allows the user to request a destination download to their vehicle. Downloads can be initiated via the TSP operator or a website that offers a destination download option. TCU receives a message requesting POI information. The TCU will then import the destination information and report back to the TSP. 3 Handsfree Telephone (Bluetooth) Features 3.
CB2-BLUE15M-TCU Owner’s Manual Draft pre-defined pairing code to any four-digit number. The pairing code is retained across power cycles and will not change unless the user chooses to change it. In addition, depending on platform, there may be operational prompts to guide user through the pairing process. Secure Simple Pairing: The primary goal of the Secure Simple Pairing option is to simplify the pairing procedure for the user.
CB2-BLUE15M-TCU Owner’s Manual Draft Connect to another device Connection Lost (e.g. out of range, device stops responding, etc…) 3.2.6 TCU Bluetooth Name The TCU Bluetooth Name is the name that is provided by the TCU to the other Bluetooth devices (i.e. phones, music players, etc…). This name provides a user friendly way (instead of the Bluetooth address) to identify the TCU during pairing, connecting, etc.
CB2-BLUE15M-TCU Owner’s Manual Draft 3.5.3 Redial The user can redial the last dialed number. This is done by sending a command to the Telephony device. It is the responsibility of the Telephony device to dial a number. For example, if the call history on the telephony device is empty, it is possible that no call will be made. 3.5.4 Dial using Speed Dial The user can dial an outgoing call using speed dial previously stored in the system.
CB2-BLUE15M-TCU Owner’s Manual Draft 3.9 SMS Messaging Feature This feature provides for Short Message Service (SMS) message processing by the TCU when connected to an SMS-capable (text messaging) mobile device. Users of the feature can: • View incoming messages on the head unit display • Listen to incoming messages audibly read through the vehicle speakers • Reply to the sender by choosing from a set of pre-defined reply messages • Initiate a phone call to a message sender 3.
CB2-BLUE15M-TCU Owner’s Manual Draft Active Call Dial Confirmation Select Name All Calls Select Type Redial Received Calls Voice Tags Dial by Number Call by Name Missed Calls Transfer Call History Mute Dialed Calls In-Call VR Voice Portal Send Touch Tones Idle Dial by Name In-Private Call Transfer Dial by Number Call History Hands Free Help BT Power OFF Redial Voice Setting Tutorial Tutorial Voice Setting No Connection Figure 2: Voice Tree Wheel Page 9 of 10
CB2-BLUE15M-TCU Owner’s Manual Draft 5 System Interfaces This section describes the user interface of TCU system. These include the various components for user interaction (e.g. the head unit display, head unit buttons and knobs, steering wheel buttons, microphone/speaker). 5.
The device under test is manufactured by the grantee (Johnson Controls Interiors L.L.C.) and sold as an OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b), RSS-Gen, RSS-210, RSS,-102, etc…, the grantee must ensure the end-user has all applicable / appropriate operating instructions. When end-user instructions are required, as in the case with this product, the grantee must notify the OEM to notify the end-user. Johnson Controls Interiors L.L.C.
Wireless notice: This product emits radio frequency energy, but the radiated output power of this device is far below the FCC and IC frequency exposure limits. This equipment complies with FCC and IC RF radiation exposure limits forth for an uncontrolled environment. Nevertheless, the device should be used in such a manner that the potential for human contact with the antenna during normal operation is minimized. This product integrates an AR5550 CDMA modem (FCC ID: N7NAR5550, IC: 2417C-AR5550).
************************************************************************ It is preferred that the following ID numbers be included in the manual if the device label is not readily accessible to the end user.
