User's Guide Part 3

9
11
Speci cations
Personalization Features
Item Feature
Factory
Setting
Available Settings
Advanced keyless
entry system
The volume of the answer-back beep during
advanced keyless entry system operation can
be changed.
Refer to Locking, Unlocking with Request
Switch (With the advanced keyless function)
on page 3-13 .
Refer to Settings on page 5-55 .
Medium
High/ Medium/
Low/ Off
The function to automatically lock the doors
when leaving the vehicle while carrying the
key can be changed.
Refer to Settings on page 5-55 .
Off On/Off
The method for unlocking the doors using the
request switch/transmitter can be changed.
Refer to Locking, Unlocking with Request
Switch (With the advanced keyless function)
on page 3-13 .
Refer to Transmitter on page 3-4 .
Refer to Settings on page 5-55 .
Once: Driver's
Twice: All
Doors
Once: All Doors/
Once: Driver's Twice:
All Doors
The time required for the doors to relock
automatically after unlocking with the request
switch/transmitter can be changed.
Refer to Settings on page 5-55 .
60 seconds
90 seconds/
60 seconds/
30 seconds
Illumination entry
The time required for the interior lamp to turn
off automatically can be changed (prevents
battery depletion when a door is open/ajar).
Refer to Settings on page 5-55 .
30 minutes
60 minutes/
30 minutes/
10 minutes
The time required for the interior lamp to turn
off automatically after all doors are closed can
be changed.
Refer to Settings on page 5-55 .
15 seconds
60 seconds/
30 seconds/
15 seconds/
7.5 seconds
Lane-change signal
The three-time ash function can be changed.
Refer to Settings on page 5-55 .
On On/Off
Auto-wiper control
The auto-wiper control function can be
changed.
Refer to Settings on page 5-55 .
On On/Off
Auto headlight off
*1
The time required for headlights to turn off
after ignition is switched off can be changed.
Refer to Settings on page 5-55 .
30 seconds
120 seconds/
90 seconds/
60 seconds/
30 seconds/
Off
*2
Auto-light control
The headlight illumination on/off timing based
on surrounding lightness/darkness can be
changed.
Refer to Settings on page 5-55 .
Medium
Light/
Medium Light/
Medium/
Medium Dark/
Dark
High Beam Control
System (HBC)
The High Beam Control System (HBC)
function can be changed.
*3
Refer to Settings on page 5-55 .
On On/Off
Mazda3_8CX9-EA-13F_Edition1.indb 11Mazda3_8CX9-EA-13F_Edition1.indb 11 2013/05/17 11:52:512013/05/17 11:52:51