User's Guide Part 2

5 – 96
Interior Features
Bluetooth
®
Skipping Voice Guidance (for faster
operation)
Press and release the talk-button.
NOTE
• The Bluetooth
®
Hands-Free system
is operable several seconds after the
ignition is switched to ACC or ON
(requires less than 15 seconds).
•
When operating the audio unit or the
A/C while using Bluetooth
®
Hands-
Free, the beep sounds or voice
guidance (audio unit)/cannot be heard.
Troubleshooting for Voice Recognition
If you do not understand an operation
method while in the voice recognition
mode, say “Tutorial” or “Help”.
Commands useable anytime during
voice recognition
“Go Back” and “Cancel” are commands
which can be used at anytime during voice
recognition.
Returning to previous operation
This command is for returning to the
previous operation while in the voice
recognition mode.
Say: [Beep] “Go Back”
Cancel
The Bluetooth
®
Hands-Free system
transitions to standby status if the
following operation is performed while the
system is activated.
Say: [Beep] “Cancel”
To prevent a deterioration in the voice
recognition rate and voice quality, the
following points should be observed:
• Phone related commands are available
only when your phone is connected via
Bluetooth
®
. Make sure your phone is
connected via Bluetooth
®
before you
operate phone related voice commands.
• Music play commands, such as Play
Artist and Play Album can be used only
in USB audio mode.
• Do not speak too slowly or loudly (no
loud voice).
• Speak clearly, without pausing between
words or numbers.
• The hands-free system cannot perform
voice recognition while voice guidance
or a beep sound is operating. Wait until
the voice guidance or the beep sound is
finished before saying your commands.
• Dialects or different wording other
than hands-free prompts cannot be
recognized by voice recognition. Speak
in the wording specified by the voice
commands.
• It is not necessary to face the
microphone or approach it. Speak the
voice commands while maintaining a
safe driving position.
• Close the windows and/or the moonroof
to reduce loud noises from outside
the vehicle, or turn down the airflow
of the air-conditioning system while
Bluetooth
®
Hands-Free is being used.
• Make sure the vents are not directing air
up towards the microphone.
NOTE
If the voice recognition performance is not
satisfactory.
Refer to Troubleshooting (Type A/Type B)
on page 5-132 .
Mazda3_8CX9-EA-13F_Edition1.indb 96Mazda3_8CX9-EA-13F_Edition1.indb 96 2013/05/17 11:51:072013/05/17 11:51:07