User's Guide Part 2

5 – 93
Interior Features
Bluetooth
®
NOTE
If an error occurred in the voice
recognition learning, re-learning can be
done by pressing the talk button with a
short press.
Voice input command list for voice
recognition learning
When reading out, the following points
must be observed:
• Read out the numbers one at a time
correctly and naturally.
(For example, “1234” must be read out
“one, two, three, four” not “twelve,
thirty four”.)
• Do not read out parentheses. “(” and
hyphens “-” are used for separating
numbers in a phone number.
Ex. “[phone]” must be spoken
“Eight, eight, eight, fi ve, fi ve, fi ve, one,
two, one, two.”
Phrase Command
1 0123456789
2 [phone]
3 Call
4 Dial
5 Setup
6 Cancel
7 Continue
8 Help
NOTE
• The applicable phrase appears in the
audio display.
•
After user voice registration is
completed, voice guidance “Speaker
enrollment is complete, returning to
main menu” is announced.
Voice recognition learning on/off
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] “Voice training”
3. Prompt: “Enrollment is enabled/
disabled. Would you like to disable/
enable or retrain?”
4. Say: [Beep] “Disable” or “Enable”
5. When “Disable” is spoken, the voice
recognition learning is turned off.
When “Enable” is spoken, the voice
recognition learning is turned on.
6. Prompt: “Speaker Enrollment is
disabled/enabled, returning to main
menu .”
Bluetooth
®
Preparation (Type B)
Device programming (Pairing)
To use Bluetooth
®
audio and Hands-Free,
the device equipped with Bluetooth
®
has to be programmed to the unit using
the following procedure. A maximum of
seven devices including Bluetooth
®
audio
devices and hands-free mobile phones can
be programmed.
Pairing Procedure
1. Select the
icon on the home screen
and display the Settings screen.
2. Select the
tab.
3. Select the
icon.
4. Turn the Bluetooth
®
setting on.
5. Select the
icon to display
the message and switch to the device
operation.
6. Using your device, perform a search
for the Bluetooth
®
device (Peripheral
device).
7. Select “Mazda3” from the device list
searched by the device.
8. (Device with Bluetooth
®
version 2.0)
Input the displayed 4-digit pairing code
into the device.
Mazda3_8CX9-EA-13F_Edition1.indb 93Mazda3_8CX9-EA-13F_Edition1.indb 93 2013/05/17 11:51:052013/05/17 11:51:05