User's Guide Part 2

5
85
Interior Features
Bluetooth
®
NOTE
Some Bluetooth
®
audio devices need a
certain amount of time before the
symbol is displayed.
If the programming failed, “ Err
ashes for three seconds .
Programming cannot be performed
while the vehicle is moving. If you
attempt to perform programming
while the vehicle is moving, “ PAIR
DISABLE ” is displayed .
If seven Bluetooth
®
audio devices
have already been programmed to
the vehicle, programming cannot be
performed and “ MEMORY FULL
is displayed. Delete one programmed
device to program another one.
Programming a Bluetooth
®
audio device
which does not have a four-digit PIN
code
1. Using the audio control dial, select
the pairing program mode “ PAIR
DEVICE ” in the “ BT SETUP ” mode.
(Refer to “Bluetooth
®
audio set up” for
details.)
2. Press the audio control dial to
determine the mode. After “ ENTER
PIN ” is displayed on the audio display
for three seconds, “ PIN 0000 ” is
displayed and the PIN code can be
input.
3. Press the audio control dial while “ PIN
0000 ” is displayed. “ PAIRING ashes
on the audio display.
4. Operate the Bluetooth
®
audio device
and set it to the program mode while
“ PAIRING ” is ashing.
5. As the Bluetooth
®
audio device
requires a PIN code, input “0000”.
6. When the programming is completed,
and “ PAIR SUCCESS ” are displayed
after about 10-30 seconds, after which
PAIR SUCCESS ” continues to be
displayed for three seconds, and then
the unit returns to the normal display.
NOTE
If pairing cannot be completed, try
“1234” instead. Refer to the owner's
manual of your mobile device for the
right PIN code.
Some Bluetooth
®
audio devices need a
certain amount of time before the
symbol is displayed.
If the programming failed, “ Err
ashes for three seconds.
Programming cannot be performed
while the vehicle is moving. If you
attempt to perform programming
while the vehicle is moving, “ PAIR
DISABLE ” is displayed .
If seven Bluetooth
®
audio devices
have already been programmed to
the vehicle, programming cannot be
performed and “ MEMORY FULL
is displayed. Delete one programmed
device to program another one.
Mazda3_8CX9-EA-13F_Edition1.indb 85Mazda3_8CX9-EA-13F_Edition1.indb 85 2013/05/17 11:51:022013/05/17 11:51:02