Operation Manual

T600HPx-3 Heat Pump Thermostats Installation Instructions 11
Canceling the Temporary Override
The Cancel Override (Cancel ovrd) prompt only
appears when the thermostat is in the unoccupied
override mode.
To resume the schedule while in the Main User Menu:
1. Press the NO key to all prompts until the Cancel
ovrd prompt appears. If the thermostat is in the
override state, this is the first prompt.
2. Press the YES key to resume the programmed
schedule.
The thermostat returns to the Status Display Menu.
Entering Permanent Temperature Setpoints
The first prompt appearing in the Main User Menu of
the thermostat when in the occupied state is to set the
permanent temperature setpoint.
To enter the permanent heating and cooling setpoints
for the Occupied and Unoccupied Modes, follow the
steps in Table 4. When changing the temperatures,
press the keys once to change the temperature in
0.5F°/0.5C° increments; press and hold down the keys
to change the temperature in 5.0F°/5.0C° increments.
Entering Temporary Temperature Setpoints
The temperature setpoints can be changed temporarily
for the occupied and unoccupied heating and cooling
modes. To temporarily change the setpoint, press the
UP/DOWN arrow keys to change the temporary
setpoint for the current mode of operation.
Note: Whether the thermostat is heating or cooling,
the respective setpoint will be temporarily adjusted. To
toggle between the temporary heating and cooling
setpoints, press the NO key while changing the
temporary setpoints.
Table 4: Entering Permanent Temperature
Setpoints (Part 1 of 2)
Thermostat
Display
Description
Press the MENU key while in the
Status Display Menu to enter the
Main User Menu.
Press the
NO key to all prompts until
the temperature setpoint prompt
appears on the display (it may be the
first prompt). Press the
YES key to
enter the temperature setting menu.
Press the
YES key to change the
occupied cooling setpoint. Press the
NO key to advance to the occupied
heating setpoint menu.
Press the
UP/DOWN arrow keys to
set the temperature. Press the
YES
key to store the value and advance to
the next menu.
Press the
YES key to change the
occupied heating setpoint. Press the
NO key to advance to the unoccupied
cooling setpoint menu.
RoomTemp
75.0
°
F
Temperat
set? Y/N
Cooling
set? Y/N
Cooling
75.0
°
F
Heating
set? Y/N
Press the UP/DOWN arrow keys to
set the temperature. Press the
YES
key to store the value and advance to
the next menu.
Press the
YES key to change the
unoccupied cooling setpoint. Press
the
NO key to advance to the
unoccupied heating setpoint.
Press the
UP/DOWN arrow keys to
set the temperature. Press the
YES
key to store the value and advance to
the next menu.
Press the
YES key to change the
unoccupied heating setpoint. Press
the
NO key to advance to the
temperature display units.
Press the
UP/DOWN arrow keys to
set the temperature. Press the
YES
key to store the value and advance to
the next menu.
Press the
YES key to set the display
units to °F or °C. Press the
NO key to
advance to the temperature setpoint
type menu.
Press the
YES key to return to the
Status Display Menu or press the
NO
key to re-enter the temperature
setting menu.
Table 4: Entering Permanent Temperature
Setpoints (Part 2 of 2)
Thermostat
Display
Description
Heating
68.0
°
F
Unocc CL
set? Y/N
Unocc CL
80.0
°
F
Unocc HT
set? Y/N
Unocc HT
62.0
°
F
°
F/
°
C
set? Y/N
Exit?
Y/N