Product Manual
JDI-LP4 Assembly & Operating Instructions
For Service Assistance
Call Toll Free
1-800-433-0708
Component Check List
Your portable oil drain was shipped with the following compo-
nents. Please be sure you receive them as listed below.
Contact us if anything is missing.
Item No. Description Qty
1 . . . . . . . . . . . . . . .Low Profile Drain . . . . . . . . . . . . . . . . . .1
2 . . . . . . . . . . . . . . .3/4” Drain Valve . . . . . . . . . . . . . . . . . . .1
3 . . . . . . . . . . . . . . .T-Handle with bolt . . . . . . . . . . . . . . . . .1
4 . . . . . . . . . . . . . . .Front and Rear Wheels . . . . . . . . . . . . .4
5 . . . . . . . . . . . . . . .Expanded Metal Screen . . . . . . . . . . . . .1
Assembly
1. Thread the 3/4” Drain Valve onto the 3/4” drain pipe located
on the back of the low profile drain.
2. Check fittings for tightness. The oil drain is now ready for
use.
Operating
1. Make sure the 3/4” drain valve is closed by turning the han-
dle clockwise until tight.
2. Roll the drain under the vehicle to be serviced and drain the
oil.
3. To empty, position the oil drain over the oil storage receptical
and open the drain valve.
Note: Aboveground used oil storage requires the use of
adapter kit 61431-2 for suction pump evacuation or JDI-EK
for self-evacuation.
JDI-LP4 Assembly & Operating Instructions
For Service Assistance
Call Toll Free
1-800-433-0708
Component Check List
Your portable oil drain was shipped with the following compo-
nents. Please be sure you receive them as listed below.
Contact us if anything is missing.
Item No. Description Qty
1 . . . . . . . . . . . . . . .Low Profile Drain . . . . . . . . . . . . . . . . . .1
2 . . . . . . . . . . . . . . .3/4” Drain Valve . . . . . . . . . . . . . . . . . . .1
3 . . . . . . . . . . . . . . .T-Handle with bolt . . . . . . . . . . . . . . . . .1
4 . . . . . . . . . . . . . . .Front and Rear Wheels . . . . . . . . . . . . .4
5 . . . . . . . . . . . . . . .Expanded Metal Screen . . . . . . . . . . . . .1
Assembly
1. Thread the 3/4” Drain Valve onto the 3/4” drain pipe located
on the back of the low profile drain.
2. Check fittings for tightness. The oil drain is now ready for
use.
Operating
1. Make sure the 3/4” drain valve is closed by turning the han-
dle clockwise until tight.
2. Roll the drain under the vehicle to be serviced and drain the
oil.
3. To empty, position the oil drain over the oil storage receptical
and open the drain valve.
Note: Aboveground used oil storage requires the use of
adapter kit 61431-2 for suction pump evacuation or JDI-EK
for self-evacuation.