Product Manual

ManualsBrandsJohnDow ManualsFuel CaddiesIndustries Diesel Fuel Caddy with Air-Operated Pump — 30-Gal. Capacity, Steel, Yellow

™

For Service Assistance

Phone Toll Free 1-800-433-0708

Pro 30 Plus Diesel Caddy

Model FC-P30A-UL-D

Operator’s Manual

REV 10/2019

JohnDow Industries, Inc.

151 Snyder Ave.

Barberton, OH 44203

Contents Page

Safety & Warning Instructions 2

General Product Description 3

Assembly 3

Operation 3-4

Storage 4

Product Specifications 4

Replacement Parts & Accessories 5

Troubleshooting 6

Notes 7

Summary of content (4 pages)

PAGE 1
™ For Service Assistance Phone Toll Free 1-800-433-0708 Pro 30 Plus Diesel Caddy Model FC-P30A-UL-D Operator’s Manual Contents Safety & Warning Instructions General Product Description Assembly Operation Storage Product Specifications Replacement Parts & Accessories Troubleshooting Notes Page 2 3 3 3-4 4 4 5 6 7 JohnDow Industries, Inc. 151 Snyder Ave.
PAGE 2
OPERATOR’S MANUAL FC-P30A-UL-D INSTRUCTIONS PERTAINING TO THE RISK OR INJURY TO PERSONS. IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS. OPERATOR’S MANUAL NOTES READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING OR SERVICING THIS EQUIPMENT It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference. DANGER Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. 1.
PAGE 3
OPERATOR’S MANUAL CONDITION Poor flow TROUBLESHOOTING POSSIBLE CAUSE Filter is incorrect size for type of fuel Filter is clogged Low air pressure Pump is difficult to prime Hose not submerged in fuel when trying to prime Ground wire is damaged or will not clamp SOLUTION Replace with correct size filter 1 micron for E85. 10 micron for gasoline, 30 micron for diesel/kerosene Replace filter Check incoming supply air pressure. Check regulator setting and adjust to 40 - 50 psi.
PAGE 4
OPERATOR’S MANUAL FC-P30A-UL-D OPERATION OPERATOR’S MANUAL Replacement Parts & Accessories STORAGE PUMPING FROM DIESEL CADDY TO VEHICLE 1. Position the Diesel Caddy near the vehicle and lock the wheel brakes. 1. Disconnect supply air when not in use. 3. Place the hose inside the fill pipe of the vehicle fuel tank. 4. Wrap and store the ground wire on the provided wire wrap bracket. 2. Always place the valve in the “OFF” position when not in use. 2.