Product Manual

ManualsBrandsJohnDow ManualsFuel CaddiesDiesel Caddie — 30-Gallon, Steel

Pro 30 Diesel Caddy

Model FC-P30-UL-D

Operator’s Manual

™

REV 03/2019

JohnDow Industries, Inc.

151 Snyder Ave.

Barberton, OH 44203

Contents Page

Safety & Warning Instructions 2

General Product Description 3

Assembly 3

Operation 4

Storage 4

Product Specifications 4

Replacement Parts & Accessories 5

Troubleshooting 6

Notes 7

For Service Assistance

Phone Toll Free 1-800-433-0708

Summary of content (4 pages)

PAGE 1
™ For Service Assistance Phone Toll Free 1-800-433-0708 Pro 30 Diesel Caddy Model FC-P30-UL-D Operator’s Manual Contents Page Safety & Warning Instructions 2 General Product Description 3 Assembly 3 Operation 4 Replacement Parts & Accessories 5 Storage Product Specifications Troubleshooting Notes 4 4 6 7 JohnDow Industries, Inc. 151 Snyder Ave.
PAGE 2
OPERATOR’S MANUAL FC-P30-UL-D INSTRUCTIONS PERTAINING TO THE RISK OR INJURY TO PERSONS. IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS. OPERATOR’S MANUAL NOTES READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING OR SERVICING THIS EQUIPMENT It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference. DANGER Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. 1.
PAGE 3
OPERATOR’S MANUAL CONDITION Pump is hard to turn or poor flow TROUBLESHOOTING POSSIBLE CAUSE Filter is incorrect size for type of fuel Filter is clogged Inside of pump is dry or rusted from extended periods of non-use Pump is difficult to prime Hose not submerged in fuel when trying to prime Replace with correct size filter 1 micron for E85. 10 micron for gasoline, 30 micron for diesel/kerosene Replace filter Remove pump out hose by loosening the 90° elbow swivel fitting on top of pump.
PAGE 4
OPERATOR’S MANUAL FC-P30-UL-D OPERATOR’S MANUAL Replacement Parts & Accessories STORAGE OPERATION 1. Always place the valve in the “OFF” position when not in use. PUMPING FROM VEHICLE TO GAS CADDY 1. Position the Gas Caddy near the vehicle and lock the front casters brakes. 2. Wrap and store the hose on the provided hose wrap bracket. 2. Attach the ground wire clamp to the vehicle to a known ground surface. 3. Wrap and store the ground wire on the provided wire wrap bracket. 3.