Replacement Part List

OPERATOR’S MANUAL JDI-FST15 FUEL STATION

Intended Use:

This product is a UN/DOT approved packaging for the transport of gasoline by motor vehicle and to gravity dispense fuel into gasoline

powered portable equipment, vehicle fuel tanks, or other approved containers. NOT for use for rail, air, or marine transportation.

Assembly Instructions:

1. Remove ground screw from tank leg using screwdriver or nut driver. Assemble green ground wire to tank by placing screw thru the

connector and reattching to tank leg. Make certain connection is securely tightened.

2. Assemble cap onto fill neck. Make sure cap is secure by turning completely to stop position.

3. Wrap ½” fitting of hose with PFTE tape. Thread onto ball valve. Tighten with wrenches.

4. Wrap 3/4” fittings on hose with PTFE tape. Thread nozzle onto hose end. Tighten with wrenches.

Contents:

Tools Required:

Flat Head Screwdriver or 5/16” (or 8mm) Nut Driver

Adjustable Wrench

/8” and 1-1/16” Wrench

PTFE Tape (included)