™ Model: JDI-FST15 15 Gallon Fuel Station (UN/DOT Approved) Operator’s Manual ™ 151 Snyder Ave. Barberton, OH 44203 Toll-Free: 800-433-0708 www.johndow.com customerservice@johndow.
OPERATOR’S MANUAL JDI-FST15 FUEL STATION INSTRUCTIONS PERTAINING TO THE RISK OR INJURY TO PERSONS. IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS. READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING OR SERVICING THIS EQUIPMENT DANGER GASOLINE – EXTREMELY FLAMMABLE • VAPORS CAN EXPLODE • HARMFUL OR FATAL IF SWALLOWED • If swallowed, do not induce vomiting. Call physician immediately. • Keep out of reach of children. • Avoid prolonged breathing of vapors. • Do not siphon by mouth.
OPERATOR’S MANUAL JDI-FST15 FUEL STATION Tools Required: Flat Head Screwdriver or 5/16” (or 8mm) Nut Driver Adjustable Wrench 7/8” and 1-1/16” Wrench PTFE Tape (included) Contents: Intended Use: This product is a UN/DOT approved packaging for the transport of gasoline by motor vehicle and to gravity dispense fuel into gasoline powered portable equipment, vehicle fuel tanks, or other approved containers. NOT for use for rail, air, or marine transportation. Assembly Instructions: 1.
OPERATOR’S MANUAL JDI-FST15 FUEL STATION To Dispense from Container: 1. Attach the ground wire clip end to frame of the equipment receiving the fuel to bond the fuel station to the equipment being filled. Bonding will place both the fuel station and receiving equipment at the same static charge potential. 2. Slowly crack the fill cap to vent any internal pressure. 3. Open the ball valve. 4. Place the dispensing nozzle into the receiving fuel tank that is being filled.
