User guide

16
3
Mix for desired temperature.
The factory temperature setting is 120°F (fixed). Mix with cold water with a mixing valve
or at the fixture for desired temperature.
To prevent scalding.
Check the temperature of the running hot
water before using. Temperatures above
125°F can scald instantly.
1
Check that electrical power is connected.
2
4
How to Use (Not using the remote controller)
Setting and Using the Water Heater
Tem
pe
rature
If you want to the temperature to be changed to 130°F or 140°F, contact the installer or Noritz.
Turn on hot water.
Turn off the hot water.
WARNING
High Temperature
The electrical power does not need to
be disconnected between uses.
Hot water
W
a
te
r
scalding.scalding.