Installation Guide

9
STEP 7 - Installing Garment Bars
1. Locate the bar dimensions in you conguration guide
2. The double hang garment bars are created by cutting 2 bars to 45 in. wide.
3. The long hang garment bar is created by cutting a bar to 23.5 in. wide.
4. Double check bar measurements.
5. Measure required dimension, mark & cut bar.
6. Repeat for all bars.
7. Insert bar end into end of garment bar.
8. Turn clockwise to tighten & repeat for each bar end.
9. Place garment bar onto J-hooks.
10. Secure garment bar to J-Hooks using #6 1 1/4 in. self tapping screws.
11. Repeat for all garment bar locations.
STEP 8 - Installing Adjustable Shelves
1. Select a 24 in. adjustable shelf
2. Insert shelf pin into shelf at hole location.
3. Repeat at each hole location.