Installation Guide

5
4. Position shelf end template onto side wall.
5. Align template line with adjacent wall line.
6. Level template.
7. Mark required Shelf End position for required depth (12in. or 16in. depth).
8. Secure shelf End using #8 - 1 1/2in. screws (use wall anchor if no stud is
present).
9. Place shelf onto hardware.
10. Place tower onto hardware.
11. Place a shelf end onto the shelf at tower end.
12. Flush tower with top shelf by moving tower left or right.
13. Level shelf front to back & mark shelf end hardware location on tower.
14. Plumb level tower side.
15. Mark tower bracket hole locations on wall.
16. Remove shelf and tower.
17. Align shelf end hardware with the mark on the tower & mark screw hole
locations.
18. Secure shelf end to tower top using #8 1/2in. screws at hole location.
NOTE: If shelf is mounted level with the tower top, the shelf end hardware
should be “centered” on the end of the front rail of the tower top.
19. Install wall anchors at tower bracket locations if no stud is present.
20. Place tower onto wall and align with hole locations.
21. Place shelf onto wall hardware.
22. Secure tower to wall using #8 1 1/2in. screws at all bracket locations.
23. Secure shelf to hardware using #4 3/4 in. screws at all hardware locations.
1
2
2 3
4 5
6 7
8 8
9 10
11
12
16
13
14
15
17
18