User manual

6
Unpacking
Warning !
Slide out the polythene bag containing the
polystyrene block before using the appliance. Pull
off adhesive strips from inside machine on top of drum.
Keep all packaging away from children.
Should the appliance be moved, it must
be transported vertically.
The appliance must not be installed
behind a lockable door, a sliding
door or a door with a hinge on the
opposite side to that of the a
ppliance.
Remove the rack
Warning!
Before appliance use all packaging parts and
drying rack must be removed from the drum.
The inside of the drum must be clean.
4 3
1 2
P1106
Installation
It is dangerous to alter the specifications or
attempt to modify this product in any way.
Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
To unpack the rack:
1.
Remove middle polystyrene part by pulling it.
Loosen polystyrene parts 3 and 4.
2. Lift slightly rack and take it carefully out from the drum.
3. Remove right polystyrene part by pulling it.
4. Remove left polystyrene part by pulling it.