User manual

Problem Possible solution

The display shows Error code (e.g. E51).

Deactivate and activate the appliance. Start a new pro-

gramme. If the problem occurs again, contact the Serv-

ice centre.

1) After maximum 5 hours, the programme ends automatically.

2) It can happen that some area remains humid when drying big items (e.g. bed sheets ).

If the drying results are not

satisfactory

• The set programme was incorrect.

• The filter is clogged.

• The Heat Exchanger is clogged.

• There was too much laundry in the appliance.

• The drum is dirty.

• Incorrect setting of the conductivity sensor

( See chapter "Settings - Adjustment of the

remaining laundry moisture degree " for better

setting).

• The airflow slots are clogged.

• Room temperature is too low or too high

( optimal room temperature 19°C to 24°C )

Tumble Dryer User Manual