User manual

Daily use
Start a programme without
delay start
1. Prepare the laundry and load the appliance.
Caution! Make sure that
when you close the door,
the laundry does not get
caught between the
appliance door and the
rubber seal.
2. Press the on/off button to activate the
appliance.
3. Set the correct programme and options for the
type of load.
The display shows the programme duration.
The drying time you see on the
display, when the cotton
programme is selected, is related
to the load of 5 kg and standard
conditions . Real drying time will
depend on type of the load
(quantity and composition), the
room temperature and the
humidity of your laundry after spin
drying phase.
4. Press the Start/Pause touch button.
The programme starts.
Starting the programme with
delay start
1. Set the correct programme and options for the
type of load.
2. Press the delay start button again and again
until the display shows the delay time you want
to set.
You can delay the start of a
programme from a minimum of
1 hour to a maximum of 20
hours.
3. Press the Start/Pause touch button.
The display shows the countdown of the delay
start.
When the countdown is completed, the
programme starts.
Change a programme
1. Press the on/off button to deactivate appliance
2. Press the on/off button to activate the
appliance.
3. Set the programme.
Alternatively:
1. Rotate the selector knob to the "Reset"
position.
2. Wait for 1 second. The display shows
.
3. Set the programme.
At the end of the programme
When the programme is completed:
• An intermittent acoustic signal operates.
• The display shows
• The indicators Filter and Tank comes
on.
• The Start/Pause indicator is on.
The appliance continues to operate with the
anti-crease phase for approximately 30 minutes
or more if Less creasing option was set (see
chapter Option - Less creasing ).
The anti-crease phase reduces creasing.
Tumble Dryer User Manual
18