User manual

If the display returns to the
normal mode (the time of the
selected programme from step
2. will be displayed), while
setting the degree of remaining
moisture, press and hold
buttons (F) and (E) once again
to enter to the "Adjustment of
remaining laundry moisture"
mode (previously set degree of
remaining moisture will change
into next value).
6. After 5 s the display returns to normal mode.
Water container indicator
By default, the water container indicator is on. It
comes on when the programme is completed or
when it is necessary to empty the water
container.
If a draining kit is installed
(additional accessory), the
appliance automatically drains the
water from the water container. In
this case we recommend that you
deactivate the indicator of the
water container.
Deactivating the water container
indicator:
1. Press the on/off button to activate the
appliance.
2. Wait approximately 8 seconds.
3. Press and hold touch buttons (E) and (D) at
the same time.
The display shows one of these 2 configurations:
• The display shows "Off". After 5 s the
display returns to normal mode.
• The display shows "On". After 5 s the
display returns to normal mode.
Buzzer on/off
To deactivate or activate the acoustic signals,
press and hold for approximately 2 seconds
touch buttons (A) and (C) at the same time.
Tumble Dryer User Manual
16