User manual

2. Turn both lock washers inwards.
3. Pull the heat exchanger out of the base
and carry it horizontally to prevent any
remaining water from spilling.
4. Clean fluff from the inside of the door and
the condenser chamber. Wipe the door
seal with a damp cloth.
5. Clean condenser. Use a brush or rinse it
thoroughly with a hand-held shower.
Hold it vertically over a washing-up bowl.
6. Insert condenser and lock into place (turn
both lock washers outwards until they
snap into place).
7. Close door in plinth.
Cleaning the drum
Caution! Do not use abrasives or
steel wool to clean the drum.
Lime in the water or cleaning agents
may form a barely visible lining on the
inside of the drum. The degree to
which the laundry has been dried is
then no longer detected reliably. The
laundry is damper than expected when
removed from the dryer.
Use a standard domestic cleaner (e.g.
vinegar-based cleaner) to wipe down
the inside of the drum and drum ribs.
Clean operating screen
and housing
Caution! Do not use furniture
cleaners or aggressive cleaning agents
to clean the machine.
Use a damp cloth to wipe down the
operating screen and housing.
15