User manual

Anti-crease
This function prolongs the anti-crease phase
to 90 mins in total. The drum rotates in
intervals during this phase. The laundry
therefore remains relaxed and free of creases.
To activate it:
1. Choose the drying programme.
2. Press the Anti-crease button - the LED
above is on.
If this additional function is selected, the anti-
crease phase at the end of the drying cycle is
lengthened by 60 minutes. The laundry can be
removed at any time during the anti-crease
phase.
To deselect the function press the Anti-
crease button again. The LED above is off.
Press the Anti-crease button. A 90 minute anti-
crease phase is set. The display now shows
the anti-crease icon. If this additional function
is selected, the anti-crease phase at the end of
the drying cycle is lengthened by 60 minutes.
The laundry can be removed at any time
during the anti-crease phase.
Alarm
The appliance is supplied with the Alarm
function deactivated.
When activated, the buzzer sounds:
– At the end of the cycle
– When the anti-crease phase starts or ends
– When the cycle is interrupted
To activate it:
1. Choose the drying programme.
2. Press the Alarm button - the LED above is
on.
To deselect the function press the Alarm
button again. The LED above is off.
Delay start
With the Delay start button, you can
delay the start of a programme by: 3,
6 or 9 hours.
1. Select the programme and additional
functions.
2. Press the Delay start button.
3. To activate the delay timer, press the
Start/Pause button.
Starting the programme
Press the Start/Pause button. The
programme starts and the LED Drying is on.
11