User manual

Troubleshooting
Warning! Refer to Safety
chapters.
What to do if...
Problem Possible cause Remedy
You cannot activate the appliance. The appliance is not connected to
an electrical supply or it is connec-
ted incorrectly.
Check if the appliance is correctly
connected to the electrical supply.
You cannot activate the appliance. The fuse is blown. Make sure that the fuse is the cause
of the malfunction. If the fuse is
blown again and again, contact a
qualified electrician.
You cannot activate the appliance. The appliance is too hot. Wait for the appliance to cool
down.
The burners do not work. There is no gas supply. Check the gas connection.
There is no spark when you try to
activate the spark generator.
Burner cap and crown are placed
incorrectly.
Place the burner cap and crown
correctly.
The flame extinguishes immediately
after ignition.
Thermocouple is not heated up suf-
ficiently.
After lightning the flame, keep the
knob pushed for equal or less than
10 seconds.
The flame ring is uneven. Burner crown is blocked with food
residues.
Make sure that the injector is not
blocked and the burner crown is
clean.
The flame colour is orange or yel-
low.
The flame can look orange or yel-
low in some areas of the burner.
This is normal.
The oven does not heat up. The oven is deactivated. Activate the oven.
The oven does not heat up. The clock is not set. Set the clock.
The oven does not heat up. The necessary settings are not set. Make sure that the settings are cor-
rect.
Cooker User Manual32