User manual

The temperature indicator shows the set
temperature.
The set temperature will be
reached within 24 hours. After a
power failure the set temperature
remains stored.
FastFreeze function
This function stops automatically after 52 hours.
1. To switch on the function:
a. Press Functions button until the
corresponding icon appears.
The FastFreeze indicator flashes.
b. Press OK to confirm.
The FastFreeze indicator is shown.
2. To switch off the function before its automatic
end:
a. Press Functions button until the
FastFreeze indicator flashes.
b. Press OK to confirm.
The function switches off by
selecting a different freezer set
temperature.
DrinksChill function
The DrinksChill mode is to be used to set an
acoustic alarm at the preferred time, useful, for
example, when you want to rapidly chill food
products for a certain length of time.
1. To switch on the function press Functions
button until the corresponding icon appears.
The DrinksChill indicator flashes.
The Timer shows the set value (30 minutes) for
a few seconds.
2. Press the Timer to change the Timer set value
from 1 to 90 minutes.
3. Press OK to confirm.
DrinkChill indicator is shown. The Timer starts
to flash (min).
At the end of the countdown the DrinksChill
indicator flashes and an audible alarm sounds.
4. Press OK to switch off the sound and
terminate the function.
It is possible to deactivate the
function at any time during the
countdown by pressing
Functions until DrinksChill
indicator flashes and then
pressing OK to confirm.
It is possible to change the time
during the countdown and at
the end by pressing the
temperature colder button and
the temperature warmer
button.
ChildLock function
To lock any possible operation through the
buttons select the ChildLock function.
1. Press Functions button until the corresponding
icon appears.
The ChildLock indicator flashes.
2. Press OK to confirm.
The ChildLock indicator is shown.
3. To switch off the function press
Functionsbutton until ChildLock indicator
flashes, then press OKto confirm.
The ChildLock indicator goes off.
High temperature alarm
An increase in the temperature in the freezer
compartment (for example due to an earlier
power failure) is indicated by:
• a flashing of the alarm and freezer temperature
indicators;
• a sounding of the buzzer.
Press any button to reset the alarm.
The buzzer switches off.
The freezer temperature indicator shows the
highest temperature reached for a few seconds.
Then show again the set temperature.
The alarm indicator continues to flash until the
normal conditions are restored.
Freezer User Manual
8