User manual

Problem Possible cause Solution
The compressor operates continu-
ally.
Temperature is set incorrectly. Refer to "Operation" chapter.
Many food products were put in
at the same time.
Wait some hours and then check the
temperature again.
The room temperature is too
high.
Refer to climate class chart on the rat-
ing plate.
Food products placed in the ap-
pliance were too warm.
Allow food products to cool to room
temperature before storing.
The door is not closed correctly. Refer to "Closing the door".
The FastFreeze function is
switched on.
Refer to "FastFreeze function".
The compressor does not start im-
mediately after pressing the Fast-
Freeze, or after changing the tem-
perature.
This is normal, no error has oc-
curred.
The compressor starts after a period
of time.
Water flows on the floor. The melting water outlet is not
connected to the evaporative
tray above the compressor.
Attach the melting water outlet to the
evaporative tray.
Temperature cannot be set. The FastFreeze or Shopping-
Mode function is switched on.
Switch off FastFreeze or Shopping-
Mode manually, or wait until the func-
tion resets automatically to set the
temperature. Refer to "FastFreeze or
ShoppingMode function".
DEMO appears on the display. The appliance is in demonstration
mode.
Keep the OK pressed for approxi-
mately 10 seconds until a long sound
is heard and display shuts off for a
short time.
The temperature in the appliance is
too low/too high.
The temperature regulator is not
set correctly.
Set a higher/lower temperature.
The food products' temperature
is too high.
Let the food products temperature
decrease to room temperature be-
fore storage.
The door has been opened often. Open the door only if necessary.
The FastFreeze function is
switched on.
Refer to "FastFreeze function".
There is no cold air circulation in
the appliance.
Make sure that there is cold air circu-
lation in the appliance.
Freezer User Manual 15