User manual

3. Close the oven door halfway to the first
opening position. Then pull forward and
remove the door from its seat.
4. Put the door on a soft cloth on a stable
surface.
5. Release the locking system to remove the glass
panels.
6. Turn the two fasteners by 90° and remove
them from their seats.
90°
7. First lift carefully and then remove the glass
panels one by one. Start from the top panel.
1
2
8. Clean the glass panels with water and soap.
Dry the glass panels carefully.
When the cleaning is completed, install the glass
panels and the oven door. Do the above steps
in the opposite sequence.
Make sure that you put the glass panels (A and
B) back in the correct sequence. The first panel
(A) has a decorative frame. The screen-printing
zone must face the inner side of the door. Make
sure that after the installation the surface of the
glass panel frame (A) on the screen-printing
zones is not rough when you touch it.
Oven User Manual
26