User manual

Clock functions
Clock functions table
Clock function Application
TIME OF DAY To set, change or check the time of day.
DURATION To set how long the appliance operates.
END To set when the appliance deactivates.
TIME DELAY To combine DURATION and END function.
MINUTE MINDER To set countdown time. This function has no effect on the operation of
the appliance.
Setting and changing the time
You must set the time before you operate the
oven.
The flashes when you connect the appliance
to the electrical supply, when there was a power
cut or when the timer is not set.
Press the or to set the correct time.
After approximately five seconds, the flashing
stops and the display shows the time of day you
set.
To change the time of day press again and
again until starts to flash.
Setting the DURATION
1. Set an oven function and temperature.
2. Press again and again until starts to
flash.
3. Press or to set the DURATION time.
The display shows
.
4. When the time ends, flashes and an
acoustic signal sounds. The appliance
deactivates automatically.
5. Press any button to stop the acoustic signal.
6. Turn the knob for the oven functions and the
knob for the temperature to the off position.
Setting the END
1. Set an oven function and temperature.
2. Press again and again until starts to
flash.
3. Press or to set the time.
The display shows
.
4. When the time ends, flashes and an
acoustic signal sounds. Press any button to
stop the signal.
5. Turn the knob for the oven functions and the
knob for the temperature to the off position.
6. The appliance deactivates automatically.
Setting the TIME DELAY
1. Set an oven function and temperature.
Oven User Manual
13