User manual

Problem Possible cause Solution
The product temperature is too
high.
Let the product temperature
decrease to room temperature
before storage.
Many products are stored at the
same time.
Store less products at the same time.
Products are too near to each other. Store products so that there is cold
air circulation.
Upper or lower square is
shown in the temperature
Display.
An error has occurred in measuring
the temperature.
Call your service representative (the
cooling system will continue to keep
food products cold, but temperature
adjustment will not be possible.)
dEMO appears on the
Display.
The appliance is in demonstration
mode (dEMO).
Keep pressed approximately 10 sec.
the OK button since a long sound of
buzzer is heard and the Display shut
off for a short while: appliance start
works regularly.
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
"Installation".
3. If necessary, replace the defective door
gaskets. Contact the Service Force Centre.
Freezer user manual 15