Freezer JLBIFIC05 User manual
Contents Safety instructions 3 Control panel 6 Display Switching on Switching off Temperature regulation Fast Freeze function Drinks Chill function Child Lock function High temperature alarm Door open alarm First use 6 6 6 7 7 7 7 8 8 9 Cleaning the interior Daily Use 9 10 Use of the freezer compartment Storage of frozen food Thawing Cold accumulators Ice-cube production Helpful Hints and Tips 10 10 10 10 11 12 Hints for freezing Hints for storage of frozen food Care and cleaning 12 12 13 Perio
Safety instructions In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features.
If the refrigerant circuit should become damaged: – avoid open flames and sources of ignition – thoroughly ventilate the room in which the appliance is situated • It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short-circuit, fire and/or electric shock. Warning! Any electrical component (power cord, plug, compressor) must be replaced Service Force agent. 1. 2. • • • • Power cord must not be lengthened.
Installation Important! For electrical connection carefully follow the instructions given in specific paragraphs. • Unpack the appliance and check if there are damages on it. Do not connect the appliance if it is damaged. Report possible damages immediately to the place you bought it. In that case retain packing. • It is advisable to wait at least four hours before connecting the appliance to allow the oil to flow back in the compressor.
Control panel 1 2 Functions 6 5 1 ON/OFF button 2 Display 4 3 6 Functions button It is possible to change predefined sound of buttons to a louder one by pressing together the Functions button and Temperature colder button for some seconds. Change is reversible.
3. To disconnect the appliance from the power disconnect the mains plug from the power socket. Temperature regulation The set temperature of the freezer may be adjusted by pressing the temperature button. Set default temperature: • -18°C for the freezer The temperature indicator shows the set temperature. The set temperature will be reached within 24 hours. Important! After a power failure the set temperature remains stored. Fast Freeze function To switch on the function: 1.
1. 2. 3. Press the Functions button until the Child Lock indicator flashes. Press the OK button to confirm. The Child Lock indicator goes off. High temperature alarm An increase in the temperature in the freezer compartment (for example due to an earlier power failure) is indicated by: • flashing the alarm and freezer temperature indicators • sounding of buzzer. To reset the alarm: 1. Press any button. 2. The buzzer switches off. 3.
First use Cleaning the interior Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand-new product, then dry thoroughly. Important! Do not use detergents or abrasive powders, as these will damage the finish. If “dEMo” appears on the Display, the appliance is in demonstration mode: refer to “WHAT TO DO IF...” paragraph.
Daily Use Use of the freezer compartment The symbol means that the freezer is suitable for freezing fresh food and for long term storage. The temperature may be regulated between -15°C and -24°C. We suggest setting the temperature to -18°C, which is optimal for energy consumption and frozen food storage. Important! At start-up the displayed temperature don't correspond with the set temperature until stabilised (within 24 hours).
Ice-cube production This appliance is equipped with one or more trays for the production of ice-cubes. Fill these trays with water, then put them in the freezer compartment. Important! Do not use metallic instruments to remove the trays from the freezer.
Helpful Hints and Tips Normal Operating Sounds • You may hear a faint gurgling and a bubbling sound when the refrigerant is pumped through the coils or tubing. This is not a fault with the appliance and is a completely normal operating sound. • When the compressor is on, the refrigerant is being pumped around and you will hear a whirring sound and a pulsating noise from the compressor. This is correct. • The thermic dilatation might cause a sudden cracking noise.
Care and cleaning Caution! Unplug the appliance before carrying out any maintenance operation. This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorized technicians. Periodic cleaning The equipment has to be cleaned regularly: • clean the inside and accessories with lukewarm water and some neutral soap. • regularly check the door seals and wipe clean to ensure they are clean and free from debris. • rinse and dry thoroughly.
What to do if… Warning! Before troubleshooting, disconnect the mains plug from the mains socket. Only a qualified electrician or competent person must do the troubleshooting that is not in this manual. Important! There are some sounds during normal use (compressor, refrigerant circulation). Problem Possible cause Solution The appliance does not operate. The appliance is switched off. Switch on the appliance. The mains plug is not connected to the mains socket correctly.
Problem Possible cause Solution The product temperature is too high. Let the product temperature decrease to room temperature before storage. Many products are stored at the same time. Store less products at the same time. Products are too near to each other. Store products so that there is cold air circulation. Upper or lower square is shown in the temperature Display. An error has occurred in measuring the temperature.
Technical data Dimension of the recess Height 1780 mm Width 560 mm Depth 550 mm Rising Time 24 h Voltage 230-240 V Frequency 50 Hz The technical information are situated in the rating plate on the internal left side of the appliance and in the energy label.
Installation Read the "Safety Information" carefully for your safety and correct operation of the appliance before installing the appliance. In this case, the space behind the top cupboard must be at least 50 mm deep. Positioning Warning! If you are discarding an old appliance that has a lock or catch on the door, you must ensure that it is made unusable to prevent young children being trapped inside.
Warning! This appliance must be earthed. The manufacturer declines any liability should these safety measures not be observed. Important! The wires in the mains lead are coloured in accordance with the following code: GREEN & YELLOW 13 AMP. FUSE 4. Check that no cut, or stray strands of wire is present and the cord clamp 4 is secure over the outer sheath. 5. Make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. 6. Switch on the appliance.
2. 3. 4. Install the spacer. Install the door. Tighten the upper pin. 2. Drill the unit using a Ø 2.5 mm drill (10 mm max. penetration). Fix the square fitting to the appliance. 13mm 2,5 Installing the appliance Caution! Make sure that the mains cable can move freely. Do the following steps: 1. If necessary cut the adhesive sealing strip and then apply it to the appliance as shown in figure. 3. Install the appliance in the niche.
I 2 1 4. 6. Remove the correct part from the hinge cover (E). Make sure to remove the part DX, in the case of right hinge, SX in opposite case. 7. Attach the covers (C, D) to the lugs and the hinge holes. Install the vent grille (B). Attach the hinge covers (E) to the hinge. Adjust the appliance in the niche. Make sure that the distance between the appliance and the cupboard front-edge is 44 mm.
ca. 50 mm D C 21 m m E E 8. B Disconnect the parts (Ha), (Hb), (Hc) and (Hd). ca. 50 mm 21 m m 10. Push the part (Hc) on the part (Ha). Ha Hb Ha Hc Hd 9. Hc Install the part (Ha) on the inner side of the kitchen furniture. 11. Open the appliance door and the kitchen furniture door at an angle of 90°. Insert the small square (Hb) into guide (Ha). Put together the appliance door and the furniture door and mark the holes.
Do a final check to make sure that: • All screws are tightened. • The sealing strip is attached tightly to the cabinet. • The door opens and closes correctly. 8 mm Ha Hb 12. Align the kitchen furniture door and the appliance door by adjusting the part Hb. Hb 13. Press the part (Hd) on the part (Hb).
Environmental concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
Repairs - after sales service Your appliance comes with a three year warranty. If it is not working correctly refer to "Something not working". If a fault occurs which you can not resolve through following the advice and information contained within this instruction manual, the next step is to contact John Lewis technical support on: 0844 871 7771 They will give you details for your local service engineer.
John Lewis, Oxford Street 020 7629 7711 John Lewis, Norwich 01603 660021 Peter Jones, Sloane Square 020 7730 3434 John Lewis, Nottingham 0115 941 8282 John Lewis, Brent Cross 020 8202 6535 John Lewis, Peterborough 01733 344644 John Lewis, Kingston 020 8547 3000 John Lewis at home, Poole 01202 756020 John Lewis, Aberdeen 01224 625000 John Lewis, Reading 0118 957 5955 John Lewis, Bluewater 01322 624123 John Lewis, Sheffield 0114 276 8511 John Lewis, Cambridge 01223 361292 John Lewis, Solihull 012
Freezer user manual
Freezer user manual 27
222354933-A-072013
