User manual

8
Building In
Recess dimensions
Height (1) 1780 mm
Depth (2) 550 mm
Width (3) 560 mm
The appliance’s door has been locked in
position for transport by means of pins on
both sides.According to the door opening
direction, remove relevant pins at the top and
at the bottom.
To ensure adequate ventilation, allow the clearances
shown in figure.
50 mm
min.
200 cm
2
200 cm
2
min.
D567
It is necessary that the cabinet has a ventilation
recess with the following dimensions:
depth 50 mm
width 540 mm
PR01
540
50
3
2
1
Before carrying out any work, remove the plug from the
power socket.
Please ensure that when the appliance is installed it is
easily accessible for the engineer in the event of a
breakdown.
The appliance is supplied with the door
opening to the right.
For door opening in the opposite
direction, perform the following actions
prior to installation
1. Unscrew the upper pin and remove the spacer
2. Remove the door.
3. Unscrew with a key the lower pin and replace it
on the opposite side.
4. Reinsert the door, refit the spacer and rescrew
the upper pin on the opposite side.