User manual

If the appliance is not working correctly, please carry out the following checks, before contacting your local

Service Force repair agent.

IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use

or installation, a charge will be made even if the appliance is under guarantee.

SYMPTOM

4 No power to the appliance

4 The temperature in the freezer is too high

4 The freezer door will not open

4 The compressor runs continously

4 Excessive frost and ice has built up

4 Noise

SOLUTION

Ñ Check there is power at the socket.

Ñ Check there is not a power cut by checking the

household lights.

Ñ Check the fuse has not blown.

Ñ Check the thermostat control knob mounted

in the top of the appliance is turned to the

correct setting relative to ambient conditions.

Ñ Check the ambient temperature is within the

appliance’s operating limits, please refer to the

installation section in this instruction book.

Relocate the appliance if necessary.

Ñ Has door just been opened? If so leave for a

few minutes to allow the air pressure to

equalise.

Ñ Adjust the thermostat control knob to give

correct temperature control. See “Setting the

temperature”.

Ñ Check that the door is closed.

Ñ Large quantities of food have recently been

placed in the cabinet and/or door is frequently

opened.

Ñ Check that air ventilation is not obstructed.

Ñ Ensure the doors are not left open.

Ñ Check that nothing is preventing the doors

from closing.

Ñ Is the door gasket intact and clean.

Something not working