User manual

Push button
A - Appliance button ON/OFF
B - Temperature and function indicator
The Control Panel
3
4
1
5
2
A
B
C
D
OffOn /
Mode
DISPLAY
2
3
4
1
1. Door open alarm indicator
2. Positive or negative Temperature indicator
Switching off
The appliance is shut off by holding down button (A)
for more than 1 second.After this, a countdown of
the temperature from -3 -2 -1 will be shown.
When the appliance is shut off, display (B) also goes
off.
Activation of functions
Each time button C is pressed, the following functions
are activated in a clockwise direction:
Symbol 4 : rapid freezing function.
No Symbol: Normal operation
When the Freezer is first
installed
Warning
Allow the appliance to stand for 2 hours after
installation.
Insert the plug into the wall socket.
After plugging the plug into the power outlet,if the
display is not illuminated, press button (A), appliance
on.
As soon as the appliance is turned on, the following
signals will appear on the control panel:
• symbol (2) will be positive, indicating that the
temperature is positive.
• the temperature flashes, the background of the
display is red and you will hear a buzzer. Press
button (C) and the buzzer will go off (also see the
section on "excessive temperature alarm").
Place the freezer thermostat control knob (D) in a
middle position, and the appliance will be set up to
provide the following temperature:
roughly -18°C in the freezer.
C - Function button
D - Thermostat control knob
3. Temperature indicator
4. IIluminated when the fast freeze function is on
12