JLBIFIC02 Built-in freezer Instruction manual
Important Safety Information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings. These warnings have been provided in the interest of safety.
Environmental Information • After installation, please dispose of the packaging with due regard to safety and the environment. • When disposing of your appliance use an authorised disposal site. Remove the plug and ensure that all locks and catches are removed to prevent young children being trapped inside. • The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
Contents For the User For the Installer Important Safety Information 2 Installation 6 Description of the appliance 5 Technical Specification 6 Control panel 12 Electrical Connection 6 When the Freezer is first installed 12 Positioning 7 Activation of functions 12 Building In 8 Switching off 12 Using the freezer 13 Before using 13 Temperature control 13 Freezing fresh food 13 Frozen food storage 13 Guide to use the Instruction Manual Excessive temperature alarm 14 Door op
Description of the Appliance 1 1 Control panel 2 Freezing fresh food compartment 3 Frozen food storage compartments On / Off Mode 1 2 5 4 3 2 2 3 3 3 3 3 5
Installation Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. It is dangerous to alter the specifications or attempt to modify this product in any way. Care must be taken to ensure that the appliance does not stand on the electrical supply cable.
Important Warning IF YOU ARE DISCARDING AN OLD APPLIANCE THAT HAS A LOCK OR CATCH ON THE DOOR, YOU MUST ENSURE THAT IT IS MADE UNUSABLE TO PREVENT YOUNG CHILDREN BEING TRAPPED INSIDE. It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation. Depending upon the position which you choose for your appliance, you may wish to reverse the way in which the door opens.
Building In Before carrying out any work, remove the plug from the power socket. Please ensure that when the appliance is installed it is easily accessible for the engineer in the event of a breakdown. The appliance is supplied with the door opening to the right. For door opening in the opposite direction, perform the following actions prior to installation 1. Unscrew the upper pin and remove the spacer 2. Remove the door. 3. Unscrew with a key the lower pin and replace it on the opposite side. 4.
Drill the unit using a Ø 2.5 mm drill (10 mm max. penetration); 13mm Ø 2,5 Fix the square fitting to the appliance. D740 Make sure that a distance of 44 mm is maintained in the lower part between the kitchen furniture and the border of the appliance. The lower hinge cover inserted in the accessories bag, is useful to guarantee the exact position of the kitchen furniture and the appliance.
From the plastic cover (E), which is used to cover the hinge with the pivot pin, you must take away the part as indicated in the drawing. This operation is made easer since there is, in the internal part of the cover hinge lid a groove that facilates the removal of this coomponent. “Remove the part marked with DX, if the pivot pin is inserted in the right hinge, SX in opposite case.” Apply covers (C-D) on joint cover lugs and into hinge holes. Snap vent grille (B) and hinge covers (E) into position.
8mm Open the appliance door and the furniture door at 90°. Insert the small square (Hb) into guide (Ha). Put together the appliance door and the furniture door and mark the holes as indicated in the figure. Remove the squares and drill holes with ø 2 mm at 8 mm from the outer edge of the door. Place the small square on the guide again and fix it with the screws supplied. Ha Hb PR167 Should the lining up of the furniture door be necessary, use the clearance of slots.
The Control Panel Mode On / Off 1 2 5 4 B A C 3 D Push button AB- Appliance button ON/OFF C- Function button Temperature and function indicator D- Thermostat control knob DISPLAY 1 1. 2. 2 Door open alarm indicator Positive or negative Temperature indicator When the Freezer is first installed Warning Allow the appliance to stand for 2 hours after installation. Insert the plug into the wall socket.
Using the freezer Before use Remove all securing tapes.Wash inside the appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water). Do not use soap or detergent as the smell may linger. Dry thoroughly. Temperature control Frozen food storage The temperature within the freezer is controlled by the thermostat situated in the top of the appliance.
Excessive temperature alarm An increase in the temperature in the freezer compartment (for example due to an electricity outage) is indicated by: - flashing temperature; - freezer compartment flashing (symbol 2); - red illumination of display; - sounding of buzzer. - alarm symbol. When normal conditions are restored: - the acoustic signal shuts off; - the temperature value continues to flash; - the display illumination remains red.
Hints and Tips Food Storage • To obtain the best results from your appliance, neither hot foods nor liquids which may evaporate, should be placed in the larder compartment. • Keep the time between buying chilled food and placing it in your fridge as short as possible. • Do not push food together too much, try to allow air to circulate around each item. • Do not store food uncovered. • Remove suspect food from your appliance and clean, refer to ‘Maintenance and Cleaning’.
Maintenance and Cleaning Before any maintenance or cleaning work is carried out, DISCONNECT the appliance from the ELECTRICITY supply. Internal cleaning Defrosting Clean the inside and accessories with warm water and bicarbonate of soda (5ml to 0.5 litre of water). Rinse and dry thoroughly. Freezer NEVER USE DETERGENTS, ABRASIVE POWDERS, HIGHLY PERFUMED CLEANING PRODUCTS OR WAX POLISHES,TO CLEAN THE INTERIOR AS THESE WILL DAMAGE THE SURFACE AND LEAVE A STRONG ODOUR.
Something not working If the appliance is not working correctly, please carry out the following checks, before contacting your local Service Force repair agent. IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee. SYMPTOM 4 No power to the appliance SOLUTION Ñ Check there is power at the socket. Ñ Check there is not a power cut by checking the household lights.
Repairs - After Sales Service Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Refer to your local Service Force Centre and always insist on genuine spare parts. Spare parts If your appliance is not performing satisfactorily; consult the fault finding guide within this instruction book (Something not working).
John Lewis Partnership 171 Victoria Street London SW1E 5NN www.johnlewis.
