User manual

TheDrinksChill indicator is shown.
The Timer start to flash (min).
At the end of the countdown the DrinksChill
indicator flashes and an audible alarm sounds.
Press OK to switch off the sound and terminate
the function.
To switch off the function repeat the procedure
until the DrinksChill goes off.
It is possible to change the time at
any time during the countdown and
at the end by pressing the
Temperature colder button and
the Temperature warmer button.
High temperature alarm
An increase in the temperature in the freezer
compartment (for example due to an earlier
power failure) is indicated by flashing the alarm
icon and freezer temperature indicators, and
sounding of buzzer.
Press any button.
The buzzer switches off.
The freezer temperature indicator shows the
highest temperature reached for a few seconds,
then displays the set temperature again.
The alarm indicator continues to
flash until the normal conditions are
restored.
Door open alarm
If the door is left open for approximately 90
seconds, the acoustic alarm starts and alarm
indicator flashes.
The alarm stops after closing the door. During
the alarm, the acoustic signal can be muted by
pressing any button.
Fan function
To switch on the function:
1. Press the Functions button until the
corresponding icon appears.
The Fan indicator flashes.
2. Press the OK button to confirm.
The Fan indicator is shown.
To switch off the function repeat the procedure
until the Fan indicator icon goes off.
If the function is activated
automatically the Fan indicator is
not shown (refer to "Daily use").
The activation of the Fan function
increase the energy consumption.
Fridge Freezer User Manual 11