Brochure

FOR WATER TREATMENT
Inch Polypropylene Shut-Off Valve
The PPSV Range of Shut-Off Valve is offered for tube sizes 1/4"
O.D. and 3/8" O.D., produced in polypropylene and fitted with EPDM
O-rings.
Polypropylene has the advantage of being more chemically
resistant than acetal.
The valves are for use with potable water. For use with other
potable liquids please contact our Technical Support Department
for guidance.
The valves are not to be used with compressed air, explosive gases,
petroleum spirits and other fuels or for heating systems.
Working Pressures and Temperatures
Water Max. 150 psi at 70˚F (Max. 10 bar at 20˚C)
Max. 60 psi at 140˚F (Max. 4 bar at 60˚C)
Min. 33˚F/1˚C
Prices are subject to change without notice.
SPEEDFIT TO SPEEDFIT
PART NO. TUBE BOX BAG
OD QTY QTY
PPSV040808W 1/4 200 10
PPSV041212W 3/8 100 10
SPEEDFIT TO MALE
NPTF THREAD
PART NO. TUBE THREAD BOX BAG
OD NPTF QTY QTY
PPSV010822W 1/4 x 1/4 200 10
PPSV011223W 3/8 x 3/8 100 10
SPEEDFIT TO FEMALE
NPTF THREAD
PART NO. TUBE THREAD BOX BAG
OD NPTF QTY QTY
PPSV500822W 1/4 x 1/4 200 10
PPSV501222W 3/8 x 1/4 100 10
NSF 51
NSF 61
COLLET LOCKING/RELEASE TOOL
PART NO. SIZE BOX BAG
QTY QTY
ICLT/2 3/16 to 1/2 50 10
TSPITOOL 1/4, 3/8 50 10
TUBE CUTTER
Suitable for up to 12mm tube.
LOCKING CLIP
PART NO. TUBE BAG BOX
OD QTY QTY
Inch PIC1808R 1/4 100 5000
PIC1812R 3/8 100 1000
PIC1816R 1/2 100 2000
Metric PMC1808R 8mm 100 8000
Secures the collet in its position to prevent an
accidental disconnection of the tube.
Locking clips should be connected only
after full insertion to prevent scraping of the
tube. Locking Clips are not designed for use
with John Guest
Stem Adapters in Swivel
Combinations.
Accessories
PART NO. BOX BAG
QTY QTY
TSNIP 50 1
BLADES BLADES ONLY 300 10
Products in this section are not IAPMO approved.
16.
1/4 Turn Valves. These valves have
been designed to allow temporary
servicing of downstream equipment
and must only be used in the fully
open or fully closed position.
DO NOT USE THESE VALVES:
In a partially open position to control ow.
To provide a permanent termination.
Without tubing assembled or plugged (or threaded connections sealed).
As a tap or “faucet”.
1/4 Turn Valves are indicated by this marker ‘
Lead
Free