Brochure

FOR WATER TREATMENT
The ASVPP Range of inch-size Angle Stop Adapter Valves is
offered in white polypropylene with food grade EPDM o-rings. Our
Angle Stop Adapter Valve connects between your valve and riser,
to the main water supply line, for applications in Reverse Osmosis,
Filtration Systems, Automatic Coffee Brewers, Ice-makers, and
many more. Please refer to our Technical Support Department for
guidance on use with other potable liquids.
The valves are not to be used with compressed air, explosive gases,
petroleum spirits and other fuels, or for heating systems.
FOR COLD WATER SUPPLY USE ONLY.
Working Pressures and Temperatures
Water Max. 150 psi at 70˚F (Max. 10 bar at 20˚C)
Min. 33˚F/1˚C
Prices are subject to change without notice.
Inch Polypropylene Angle
Stop Adapter Valves
*Conversion Adapter can be threaded to either side of the valve to
make configurations of 1/2”x1/2” NPS or 3/8”x3/8” Compression.
NSF 51
NSF 61
ANGLE STOP ADAPTER VALVE •
PART NO. THREAD MALE THREAD FEMALE TUBE BAG BOX
COMPRESSION COMPRESSION OD QTY QTY
ASVPP1LF 3/8” x 3/8” x 1/4” 1 30
ASVPP2LF 3/8” x 3/8” x 3/8” 1 30
*Contains less than 0.25% lead.
ANGLE STOP ADAPTER VALVE (CONVERSION THREAD) •
PART NO. THREAD MALE THREAD TUBE BAG BOX
FEMALE NPS COMPRESSION OD QTY QTY
ASVPP5LF 1/2” x 3/8” x 1/4” 1 40
ASVPP6LF 1/2” x 3/8” x 3/8” 1 20
Products in this section are not IAPMO approved.
1
2
3
4
5
6
7
4
4
7
1. Shut-o water supply at brass/chrome
supply valve.
2. Disconnect riser from brass/chrome
supply valve.
3. Ensure that the sealing gasket is fully
inserted into the Angle Stop Valve
female thread.
4. Install Angle Stop Adapter Valve on supply valve.
5. Connect the riser to the Angle Stop Adapter Valve.
6. Fully insert tubing into the Speedt side of the valve.
7. Open valves and check for leaks.
How to connect the Angle Stop Adapter Valve
WATER SUPPLY KIT
PART NO. BAG BOX
QTY QTY
WSK-W (White) 1 12
WSK-B (Blue) 1 12
Includes:25feet1/4”LLDPETubing,(1)1/4”
SupplyValve,(1)1/4”Connector.
Lead
Free
15.
www.johnguest.com
ICE MAKER/WATER SUPPLY KIT
PART NO. BAG BOX
QTY QTY
ICE MAKER KIT 1 12
Includes: 25 feet 1/4” LLDPE Tubing,
(1) 1/4” Supply Valve, (1) 1/4” Connector
• 1/4 Turn Valves. These valves have been designed to allow
temporary servicing of downstream equipment and must only
be used in the fully open or fully closed position.
DO NOT USE THESE VALVES:
• In a partially open position to control ow.
• To provide a permanent termination.
• Without tubing assembled or plugged (or threaded connections sealed).
• As a tap or “faucet”.
1/4 Turn Valves are indicated by this marker ‘•’