Installation Guide

8
JG Speedfit
Plumbing and Heating
Size Stop distance
10mm 20mm
15mm 30mm
22mm 35mm
28mm 44mm
Pipe stop distances
Collet covers and collet clips
Stops are located at the following distances from the end
of the fitting:
Use a collet cover or collet clip to provide added security
against pipe disconnection, e.g. the fitting coming into
contact with rigid surfaces and behind dry-lining walls.
Collet covers for use with standard Speedfit fittings,
are available in white, red or blue to allow colour coding
of pipes.
White or grey collet clips are used with standard fittings
to prevent accidental pipe disconnection.
Red or blue collet clips provide colour coding of pipe on
Twist & Lock fittings. They are not designed to prevent
accidental release and should be fitted when the fitting is
in the locked position.
Collet cover
Collet clip