Installation Guide

7
What not to do
DO NOT
insert fingers into
the fitting as the
stainless steel
teeth may cause
injury.
Remember to pressure test the completed installation according
to the recommendations in our Technical Checklist.
Don’t
Use hacksaws to cut the pipe or leave burrs on the end of
the pipe.
Don’t
Don’t forget to push the pipe fully into the fitting, past
both the collet (gripper) and the O-Ring.
Don’t
Use damaged or scored pipe. Score marks can cause
leaks passed the O-Ring.
Fitting may be gripped but not
sealed if pipe is not fully inserted
Pipe mark not level with collet head –
indicating pipe not pushed fully home