Installation Guide

12
JG Speedfit
Plumbing and Heating
Fittings for cold water services
Above and below ground
This range of fittings for MDPE Pipe uses a Speedfit collet
with stainless steel teeth to provide extra grip on the pipe
and has WRAS Approval.
Application
Speedfit underground fittings for MRS PE80 metric size
polyethylene cold water service pipe have been designed
for connection of:
1. Blue pipe to BS EN 12201-2, 20mm PN16, 25mm and
32mm PN12.5.
The Technical Checklist for Cold Water Services Fittings
is on page 24.
Making the connection could not be easier. All you
need is the pipe, the fitting and a pair of hands. The
range is designed to provide a long service life and
includes adaptors for screwed pipe, copper and
imperial sized LDPE.