Installation Guide

US 1 877 700 4242 | [e-mail] | johnguest.com
Ice Maker/
Water Supply Kit
• Faster installation time
• Easy disconnect
• Utilizes John Guest push-to-connect technology with over
50 years of proven performance
• Installs in minutes onto existing under sink water supply
valve
• Compatible with most major refrigerator brands
• 1/4 turn angle stop valve provides serviceability without
interrupting water flow to sink
• Packaging includes easy to follow installation instructions
and a QR Code to an instructional “How to Install” video
• Water Supply Kits are designed for applications in Reverse
Osmosis, Filtration Systems, Automatic Coffee Brewers,
Ice Makers and most refrigeration hookups
• For cold water supply use only
• NOT suitable for compressed air, explosive gases,
petroleum spirits and other fuels, or for heating systems
John Guest Ice Maker/water Supply Kits eliminates the use of a
self-piercing valve, these kits are simple to use and install onto
existing plumbing in minutes. It Provides an easy, leak-free, and
reliable connection to your ice maker. The kit incorporates an
Angle Stop Adaptor Valve with John Guest Push-to-Connect
technology which installs in no time onto an existing under
sink water supply valve.
Spec Sheet
Push-To-Connect
Features and benets
Applications
Contents
JGPTIMWS0221
Description
1/4 in. O.D. x 3/8 in. Male Compression x 3/8 in.
Female Compression Angle Stop Adapter Valve
1/4 in. OD Connector
1/4 in. OD Polyethylene Tubing
Qty
1
1
25 ft.
Specications Data
Working pressures and temperatures
WATER
Max: 150 psi
Min: 33°F/1°C
TUBING
FITTINGS
Materials
Natural
Polyethylene
Polypropylene
EPDM
Stainless Steel
Brass
70°F (Max. 10 bar at 20˚C)at
Color
Materials
Body
O-ring
Grab Ring
Metal
1
2
1
2
3
4
Step 1
Push tubing into
the tting until
the mark lines
up with the face
of the tting.
Step 2
Pull to check
tha the
connection is
secure.
Female Adapter Installation
.
.
TO DISCONNECT
To disconnect, ensure that the system is
depressurized, push the collet square
against the tting. With the collet held in
this position the tube can be removed.
Tubing
Angle Stop
Adapter Valve
# Ice Maker Kit
Codes and Standards
Manufactured with FDA compliant materials and NSF 61 and
51 certied.
Completely lead-free and corrosion free construction
Name
Date
Architect/Owner
Contractor
Tag
Notes
Product Submittal