Brochure

CARTRIDGE
O-RING
TUBE STOP
CARTRIDGE
O-RING
TUBE STOP
Half Cartridges
CARTRIDGE ASSEMBLY
1. Ensure that the cavity
is clean and free from
debris, burrs, score
marks, etc.
2. Insert the cartridge
down into the housing;
ensure the cartridge is
ush with the housing.
3. Insert the O-ring. 4. Insert Collet to
complete assembly.
Metric
Tube OD ØA ØB ØC D E1 E2 F1 F2 ØG H
4mm * 12.50 8.30 4.14 4.90 8.90 11.30 12.80 15.20 3.30 15.0
4mm ** 11.98 8.30 4.14 4.90 8.90 11.30 12.80 15.20 3.30 15.0
5mm 11.98 9.06 5.13 4.90 8.63 11.17 12.44 14.98 4.30 15.0
6mm 13.41 10.00 6.12 4.60 9.80 12.20 14.00 16.50 5.30 16.5
8mm 13.82 11.94 8.13 5.46 10.15 12.70 15.00 17.50 7.40 17.0
10mm 16.05 14.00 10.15 6.86 11.81 14.35 18.17 20.71 9.20 19.0
12mm* 19.10 16.54 12.15 8.65 15.50 19.00 23.50 27.00 11.20 22.0
12mm** 19.74 16.54 12.15 7.72 15.90 - 23.90 - 11.20 24.0
15mm 22.86 20.32 15.19 9.50 17.50 21.00 26.90 30.40 14.20 27.0
22mm 31.05 27.80 22.20 10.85 21.10 24.70 31.60 35.20 21.20 34.5
All dimensions in mm
* - Metal Half Cartridges.
** - Plastic Half Cartridges.
All dimensions in inches
* - Metal Half Cartridges.
** - Plastic Half Cartridges.
Tube OD ØA ØB ØC D E1 E2 F1 F2 ØG H
5/32" * 0.492 0.327 0.163 0.193 0.350 0.445 0.504 0.598 0.13 0.59
5/32" ** 0.472 0.327 0.163 0.193 0.350 0.445 0.504 0.598 0.13 0.59
3/16" 0.472 0.348 0.193 0.193 0.340 0.440 0.490 0.590 0.16 0.59
1/4" 0.528 0.424 0.255 0.181 0.386 0.480 0.555 0.650 0.23 0.67
5/16" 0.544 0.470 0.320 0.215 0.400 0.500 0.590 0.690 0.29 0.67
3/8" 0.632 0.547 0.380 0.270 0.465 0.565 0.720 0.815 0.35 0.79
1/2" 0.777 0.671 0.506 0.304 0.561 0.659 0.797 0.896 0.48 0.93
5/8” 0.935 0.836 0.638 0.335 0.703 - 1.093 - 0.50 1.06
Tube OD ØA ØB ØC D E1 E2 F1 F2 ØG H
1/2” CTS* 0.935 0.836 0.638 0.335 0.693 - 1.057 - 0.546 1.060
1/2” CTS** 0.967 0.836 0.638 0.392 0.693 - 1.057 - 0.546 1.060
3/4” CTS* 1.222 1.102 0.886 0.427 0.831 - 1.362 - 0.776 1.358
3/4” CTS** 1.222 1.102 0.886 0.447 0.831 - 1.362 - 0.776 1.358
1” CTS* 1.480 1.398 1.141 0.429 0.791 - 1.386 - 1.003 1.628
Inch
Cavity Dimensional Detail (Inch)
Cavity Dimensional Detail (CTS)
Cavity Dimensional Detail (Metric)
E1 and F1 relate to one o-ring.
E2 and F2 relate to two o-rings.
E1 and F1 relate to one o-ring.
E2 and F2 relate to two o-rings.
32