Instructions / Assembly

Technical Manual
John Deere
Snowthrower Mitts
Quickly fits John Deere
Snowthrower handlebars
Specifications
Fabric: 300D Polyester +PU
200D Polyester + PU
Poly Batting
Color: Black
Made in China
Size: Part #:
12.25”L x 12”H x 8”H LP22705
Weather resistant fabric shell
Poly-fill insulation stays warm even if wet
Warm and comfortable fleece lining
Open support cuff for fast and easy access to handle bars
BEFORE using be sure you can operate ALL controls with the mitts on your handlebars. Failure to
do so could result in lack of control. Remember that with the mitts on you will be operating the
controls completely by feel.
WARNING
Never use the mitts if they obstruct operation of any of the controls on your machine.
WARNING
BE SURE TO SECURE THE STRAP ON EACH MITT BEFORE OPERATING. If the mitts become
loose during operation it could result in loss of control.
Fit
Fits snowthrower handlebars. Always be sure that the mitts fit your particular handlebars before
installing.
Installation
1. Slip the smaller end of your mitt with the straps over the handlebar controls. Secure the mitt to
the handlebar by tightly overlapping the hook and loop strap (Fig. 1).
2. Be sure that each mitt is tightly secured to the handlebars.
3. Before operation be sure that you can operate all controls and that all controls are free and
clear (Fig. 2).
Cleaning
Machine or hand wash. Line dry or machine dry on air or delicate.
Limited warranty
Your mitts are factory warranted for workmanship and materials for two years after purchase.
Questions, problems, missing parts?
Before returning to your retailer, call Classic Accessories customer service at 1-800-854-2315, 8
a.m. – 4 p.m., PST, Monday – Friday. Email: [e-mail]
LP22705 11.23.09
Technical Features & Advantages