Owner's manual
Table Of Contents
- Introduction
- Product Identification
- Safety Labels
- Safety
- Operating Safely
- Using a Spark Arrestor
- Checking Mowing Area
- Parking Safely
- Rotating Blades are Dangerous
- Protect Children
- Avoid Tipping
- Keep Riders Off
- Towing Loads Safely
- Wear Appropriate Clothing
- Driving Safely on Public Roads
- Practice Safe Maintenance
- Avoid High Pressure Fluids
- Prevent Fires
- Handling Fuel Safely
- Tire Safety
- Checking Wheel Hardware
- Handling Waste Product and Chemicals
- Assembly
- Operating Controls
- Operating
- Daily Operating Checklist
- Adjusting Seat
- Adjusting Cutting Height
- Checking Mower Deck Level
- Adjusting Mower Deck Level
- Adjusting Mower Deck Wheels
- Testing Safety Systems
- Testing Park Brake Switch
- Testing Park Brake
- Testing Attachment Engagement Switch or Lever
- Testing Seat Switch
- Testing Reverse Implement Option (RIO)
- Using the Park Brake
- Using the Hour Meter and Service Reminder
- Using Key Switch and Headlights
- Starting the Engine
- Idling the Engine
- Stopping the Engine
- Using Travel Controls on Gear Transmission
- Using Travel Controls on Automatic Transmission
- Using The Reverse Implement Option (RIO)
- Using Cruise Control (LA125, LA135, LA145, LA155, LA165, LA175)
- Engaging and Disengaging Mower
- Using Mulch Cover (107 cm (42 in.) and 122 cm (48 in.) Mower Decks (If Equipped)
- Using Wash Port to Clean Mower Deck
- Unplugging Mower, Bagger, Material Collection System
- Moving Machine by Hand
- Transporting Machine on Trailer
- Using Weights
- Using Tire Chains
- Using Accessories
- Choosing Mower Blades
- Mowing Tips
- Service Intervals
- Service Lubrication
- Service Engine
- Engine Warranty Maintenance Statement
- Avoid Fumes
- Engine Oil
- Checking Engine Oil Level
- Changing Engine Oil and Filter
- Cleaning Air Intake Screen and Engine Fins
- Checking and Cleaning Air Cleaner Elements (LA105 and LA115)
- Checking and Cleaning Air Cleaner Elements (LA135 and LA145)
- Checking and Cleaning Air Cleaner Elements (LA125)
- Checking and Cleaning Air Cleaner Elements (LA155, LA165 and LA175)
- Checking and Cleaning Emission Filter (If Equipped)
- Checking Spark Plug
- Adjusting Carburetor
- Replacing Fuel Filter
- Service Transmission
- Service Mower
- Removing or Installing Mower Drive Belt at Engine Drive Sheave (122 cm (48 in.) and 137 cm (54 in...
- Removing Mower Deck
- Installing Mower Deck
- Replacing Mower Drive Belt (107 cm (42 in.) Mower Deck)
- Replacing Mower Drive Belt (122 cm (48 in.) and 137 cm (54 in.) Mower Decks)
- Adjusting Mower Belt Tension (107 cm (42 in.) Mower Deck)
- Adjusting Spindle Brakes (107 cm (42 in.) Mower Deck)
- Checking for Bent Mower Blades
- Servicing Mower Blades
- Sharpening Blades
- Balancing Blades
- Service Electrical
- Service Miscellaneous
- Troubleshooting
- Storage
- Specifications
- Gear Model LA105
- Automatic Model LA115
- Automatic Model LA125
- Automatic Models LA135 and LA145
- Automatic Model LA155
- Automatic Models LA165 and LA175
- Electrical System
- Capacities
- Fuel System (All Models)
- Recommended Lubricants (All Models)
- Dimensions
- Tires
- Mower Deck - 107 cm (42 in.)
- Mower Deck - 122 cm (48 in.)
- Mower Deck - 137 cm (54 in.)
- Warranty
- Index
- Getting Quality Service
- Service Record
- Table of Contents
Service Electrical - 35
SERVICE ELECTRICAL
Servicing Mower Blades
Removing Mower Blades
1. Park machine safely. (See Parking Safely in SAFETY section.)
2. Raise mower deck to gain access to mower blades. If necessary,
remove mower deck.
3. Block mower blade with a piece of wood to prevent it from spinning.
MX16569
4. Loosen and remove nut (A), washer (B), and blade (C).
5. Inspect blades; sharpen, balance or replace blades as necessary.
Installing Mower Blades
1. Position mower blade (C) with the cutting edge towards the ground.
2. Align the splined center hole in the blade with the splined spindle shaft
(D) and put the blade onto the mower spindle shaft.
3. Install washer, with cupped side towards blade, and install nut to secure
blade onto splined spindle shaft.
4. Block mower blade with a piece of wood to prevent spinning and tighten
nut:
• Using 15/16 in. socket, tighten 5/8 in. blade nut to 88 N•m (65 lb-ft).
Sharpening Blades
• Sharpen blades with grinder, hand file, or electric blade sharpener.
MIF
• Keep original bevel (A) when grinding.
• Blade should have 0.40 mm (1/64 in.) cutting edge (B) or less.
• Balance blades before installing.
Balancing Blades
1. Clean blade.
M61524
2. Put blade on nail in a vise. Turn blade to horizontal position.
3. Check balance. If blade is not balanced, heavy end of blade will drop.
4. Grind bevel of heavy end. Do not change blade bevel.
Service Electrical
WARNING: Battery posts, terminals and related accessories contain lead
and lead components, chemicals known to the State of California to cause
cancer and reproductive harm. Wash hands after handling.
c CAUTION: Avoid injury! Rotating blades are dangerous.
Before adjusting or servicing mower:
• Disconnect spark plug wire(s) or battery negative (-) cable to
prevent engine from starting accidentally.
• Always wear gloves when handling mower blades or working
near blades.
c CAUTION: Avoid injury! Blades are sharp. Always wear
gloves when handling blades or working near blades.
Always wear safety eye protection when grinding.
C
B
D
A
c CAUTION: Avoid injury! Blades are sharp. Always wear
gloves when handling blades or working near blades.
A
B