Operator's Manual
Table Of Contents
- Introduction
- Safety
- Recognize Safety Information
- Understand Signal Words
- Follow Safety Instructions
- Practice Safe Maintenance
- Use Steps and Handholds Correctly
- Handle Electronic Components and Brackets Safely
- Use Electronic Display Properly
- Prevent Electrical Shock and Fires
- Avoid Exposure to High Radio Frequency Fields
- Remote Controls
- Regulatory and Compliance Information
- System Overview
- Component Overview
- Setting Up—GreenStar™ 3 2630 Display
- Setting Up—Generation 4 Display
- Operating
- Operating–Managing Data On Wireless Data Server
- Operating–Updating Software
- Operating–Resetting Wireless Password
- Troubleshooting
- Maintenance
- Index
- John Deere Service Literature Available
- John Deere Service Keeps You On Job
PROOF PROOF
● Only characters available on the display
6. Select the Password Settings button (B). Enter a
password in the Password entry box (C) and the
same password in the Conrm Password entry box
(D).
7. Factory default channel on the Wireless Channel
drop-down menu (E) is 6. If using other wireless
communication devices (for example, the Machine
Communication Radio) within 4.8 km (3 mi) of the
wireless data server, select the channel furthest
away from the channel used by the other device.
HC94949,0000F58-19-23APR19
Connect Device to Wireless Data Server
On a mobile device, connect to the Wireless Network
Name that was set up on the display.
1. Select wireless network name.
2. Enter wireless password.
HC94949,0000F4B-19-23APR19
Set Up Display
PC17269—UN—15JUL13
Menu Button
1. Select the Menu button.
PC25841—UN—28JUN18
Applications Tab
2. Select the Applications tab.
PC17260—UN—11JUL13
Fields and Boundaries Application
3. Select the Fields and Boundaries application.
4. Enter the client, farm, and eld.
PC20410—UN—22MAY15
Equipment Manager Application
5. Select the Equipment Manager application.
6. Enter the machine and implement settings and verify
the recording trigger.
PC20415—UN—11MAY15
Work Setup Application
7. Select the Work Setup application.
8. Enter the product information.
(For more information, reference the Generation 4
Display Operator’s Manual.)
AE77568,0000408-19-28JUN18
Setting Up—Generation 4 Display
50C-2