Operator's Manual
Table Of Contents
- Introduction
- Safety
- Recognize Safety Information
- Understand Signal Words
- Follow Safety Instructions
- Practice Safe Maintenance
- Use Steps and Handholds Correctly
- Handle Electronic Components and Brackets Safely
- Use Electronic Display Properly
- Prevent Electrical Shock and Fires
- Avoid Exposure to High Radio Frequency Fields
- Remote Controls
- Regulatory and Compliance Information
- System Overview
- Component Overview
- Setting Up—GreenStar™ 3 2630 Display
- Setting Up—Generation 4 Display
- Operating
- Operating–Managing Data On Wireless Data Server
- Operating–Updating Software
- Operating–Resetting Wireless Password
- Troubleshooting
- Maintenance
- Index
- John Deere Service Literature Available
- John Deere Service Keeps You On Job
PROOF PROOF
Congure Wireless Data Server
PC16682—UN—18MAR13
ISOBUS VT Application
1. Select the ISOBUS VT application.
PC15293—UN—18MAR13
ISOBUS VT Menu Button
2. Select the ISOBUS VT Menu button.
PC21499—UN—14SEP15
Wireless Data Server Button
3. Select the Wireless Data Server button.
PC21805—UN—29OCT15
Setup Softkey
4. Select the Setup softkey.
PC21802—UN—29OCT15
Wireless Data Server Setup
PC21803—UN—29OCT15
Create Password
A—Wireless Network Name Entry Box
B—Password Settings Button
C—Password Entry Box
D—Conrm Password Entry Box
E—Wireless Channels Drop-Down Menu
5. Enter a name for the wireless network in the Wireless
Network Name entry box (A). To dierentiate
between machines, use a unique name (for example,
John’s Combine).
NOTE: A password is required to connect a mobile
device to the wireless data server (WDS). Ensure
that the password can be easily remembered, or
record the password and store for future reference.
Password criteria:
● 8—21 characters in length
● No spaces
Setting Up—Generation 4 Display
50C-1