Operator's Manual
Table Of Contents
- Introduction
- Safety
- Recognize Safety Information
- Understand Signal Words
- Follow Safety Instructions
- Practice Safe Maintenance
- Use Steps and Handholds Correctly
- Handle Electronic Components and Brackets Safely
- Use Electronic Display Properly
- Prevent Electrical Shock and Fires
- Avoid Exposure to High Radio Frequency Fields
- Remote Controls
- Regulatory and Compliance Information
- System Overview
- Component Overview
- Setting Up—GreenStar™ 3 2630 Display
- Setting Up—Generation 4 Display
- Operating
- Operating–Managing Data On Wireless Data Server
- Operating–Updating Software
- Operating–Resetting Wireless Password
- Troubleshooting
- Maintenance
- Index
- John Deere Service Literature Available
- John Deere Service Keeps You On Job
PROOF PROOF
Congure Wireless Data Server
PC8663—UN—29APR15
Menu Button
1. Select the Menu button.
PC20562—UN—16DEC14
Wireless Data Server Button
2. Select the Wireless Data Server button.
PC18513—UN—26FEB14
Setup Softkey
3. Select the Setup softkey.
PC21325—UN—29JUL15
Wireless Data Server Setup
PC21368—UN—16JUL15
Create Password
A—Wireless Network Name Entry Box
B—Password Settings Button
C—Password Entry Box
D—Conrm Password Entry Box
E—Wireless Channels Drop-Down Menu
4. Enter a name for the wireless network in the Wireless
Network Name entry box (A). To dierentiate
between machines, use a unique name (for example,
John’s Combine).
NOTE: A password is required to connect a mobile
device to the wireless data server (WDS). Ensure
that the password can be easily remembered, or
record the password and store for future reference.
Password criteria:
● 8—21 characters in length
● No spaces
● Only characters available on the display
5. Select the Password Settings button (B). Enter a
password in the Password entry box (C) and the
same password in the Conrm Password entry box
(D).
6. Factory default channel on the Wireless Channel
drop-down menu (E) is 6. If using other wireless
communication devices (for example, the Machine
Communication Radio) within 4.8 km (3 mi) of the
WDS, select the channel furthest away from the
channel used by the other device.
HC94949,0000F57-19-23APR19
Connect Device to Wireless Data Server
On a mobile device, connect to the Wireless Network
Name that was set up on a display.
1. Select wireless network name.
Setting Up—GreenStar™ 3 2630 Display
50B-1